Connection with Parrot mini-drone at 192.168.3.1 failed
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I am trying to deploy my code on Parrot Mambo, it builds and then this interface gets opened. But for running I get this error:
Connection with Parrot mini-drone at 192.168.3.1 failed, Ensure that drone is powered on and connected to the computer over Bluetooth
I have used the Keyboard input block in my code. Where is the problem?
I have checked my firewall and it is disabled.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/237144/image.png)
4 commentaires
Christopher Clark
le 4 Oct 2019
I would also be very interested in a fix for this...I am experiencing the same issue even though the command line shows the drone is connected.
Réponses (1)
Vinod Hegde
le 6 Déc 2023
Hello,
To better understand the failure scenario you are experiencing, could you please provide the following details?
1. The version of MATLAB you are currently using.
2. The version of the Parrot Support Package installed on your system.
3. The operating system platform on which you are attempting to use the Simulink Parrot Support Package.
For troubleshooting purposes, I recommend revisiting the Parrot Hardware Setup screen to ensure that the drone is properly configured to run the model.
Please refer to the documentation for your specific version of MATLAB. For reference, here is the documentation page for the 23b release: [Set Up and Deploy on Parrot Minidrone](https://www.mathworks.com/help/supportpkg/parrot/ug/set-hardware-and-deploy-on-parrot-minidrone.html).
Thank you
2 commentaires
Benjamin Campbell
le 6 Déc 2023
Modifié(e) : Benjamin Campbell
le 6 Déc 2023
I get the same thing, the ping test works in the set up of the drone, but then it fails when I press the start button. I am using the 2021a version of MATLAB, version 21.1.3 of the Parrot support package, and windows 10 operating system. Thank you!
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1562204/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1562209/image.jpeg)
Interestingly it does work when I run just the empty simulink parrot mambo template where it runs one or two motors at a time. But when I try to use the asbQuadcopter FlightControlSystem it says it can't connect via bluetooth - despite a successful build. Any help would be very appreciated! :)
Vinod Hegde
le 8 Déc 2023
Modifié(e) : Vinod Hegde
le 8 Déc 2023
Hello Benjamin,
Can you try the following example "parrotMinidroneHoverStart": https://www.mathworks.com/help/supportpkg/parrot/ug/fly-a-parrot-minidrone-using-the-hover-simulink-model.html, and see if you are able to perform required operations.
Also attached here the link to other Parrot examples for reference that could be useful: Parrot Examples
Thank you.
Voir également
Catégories
En savoir plus sur MATLAB Support Package for Parrot Drones dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!