MATLAB - System Generator - dSPACE compatibility

Dear all,

It is mentioned in https://www.xilinx.com/support/answers/55830.html , that Vivado System Generator for DSP 2018.1 is compatible with MATLAB 2017a/b.

Is anyone aware if it is compatible with MATLAB 2018 versions?

System Generator is intended to be used with dSPACE.

Thanks in advance. I am looking forward to hearing from you.

Best regards,

Giorgo

Answer 1

[Shubham Kashyap]

Please visit the following website for the full details about Vivado System Generator requirements: https://www.xilinx.com/support/answers/55830.html

Note: For ISE Design Suite System Generator for DSP, see (Xilinx Answer 17966).

For more details on software and hardware requirements, see the Vivado Design Suite User Guide for Model-Based DSP Design using System Generator.

Below are the corresponding compatible versions of MATLAB and System Generator:

Vivado System Generator for DSP 2018.1:

• Vivado Design Suite 2018.1 System Edition
• Supported MATLAB Versions: 2017a and 2017b from MathWorks (requires Fixed-Point Designer for bus-widths greater than 53 bits)

Vivado System Generator for DSP 2017.4

• Vivado Design Suite 2017.4 System Edition
• Supported MATLAB Versions: 2016a, 2016b, 2017a and 2017b from MathWorks (requires Fixed-Point Designer for bus-widths greater than 53 bits)

Vivado System Generator for DSP 2017.3

• Vivado Design Suite 2017.3 System Edition
• Supported MATLAB Versions: 2016a, 2016b and 2017a from MathWorks (requires Fixed-Point Designer for bus-widths greater than 53 bits)

Vivado System Generator for DSP 2017.2

• Vivado Design Suite 2017.2 System Edition
• Supported MATLAB Versions: 2016a, 2016b and 2017a from MathWorks (requires Fixed-Point Designer for bus-widths greater than 53 bits)

Vivado System Generator for DSP 2017.1

• Vivado Design Suite 2017.1 System Edition
• Supported MATLAB Versions: 2016a, 2016b and 2017a from MathWorks (requires Fixed-Point Designer for bus-widths greater than 53 bits)

Vivado System Generator for DSP 2016.4

• Vivado Design Suite 2016.4 System Edition
• Supported MATLAB Versions: 2015a, 2015b, 2016a and 2016b from MathWorks (requires Fixed-Point Designer for bus-widths greater than 53 bits)

Vivado System Generator for DSP 2016.3

• Vivado Design Suite 2016.3 System Edition
• Supported MATLAB Versions: 2015a, 2015b, 2016a and 2016b from MathWorks (requires Fixed-Point Designer for bus-widths greater than 53 bits)

Vivado System Generator for DSP 2016.2

• Vivado Design Suite 2016.2 System Edition
• MATLAB 2014a, 2014b, 2015a and 2015b from The MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)

Vivado System Generator for DSP 2016.1

• Vivado Design Suite 2016.1 System Edition
• MATLAB 2014a, 2014b, 2015a and 2015b from The MathWorks (requires Simulink Fixed-Point Toolbox for bus-widths greater than 53 bits)