- awgn(RX,SNR,'measured') adds noise to each sample of RX. If RX is a real vector, only the real component has noise added to it. If RX is a complex vector, noise with complex representation ‘a + ib’ is added to each element of RX. The values of ‘a’ and ‘b’ are generated using a gaussian distribution, where the magnitudes are dependent on the SNR value provided. The 'measured' option takes the current received signal power in consideration to generate the noise samples.
- As mentioned, this is valid only if the input RX samples are real. If it is complex IQ samples, then this may not be a valid assumption.
How awgn add white noise on complex envolope signal
17 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hello
An I/Q baseband signal goes through Tx, the wave received by Rx at carrier (fc) with condisering receiver noise should be "rx_noise"
noise=0.1*rand(length(t),1)
rx = [I(t)*cos(2*pi*fc*t) - Q(t)*sin(2*pi*fc*t)]
rx_noise=rx.*noise
then use Matlab snr, we can get the SNR
SNR=snr(rx,noise);
the complex envolope of the rx is
RX=[I(t) + 1i*Q(t)].*exp(1i*2*pi*fc*t)
My question are:
- how "RX_noise=awgn(RX,SNR,'measured') " add noise to the RX?
- does real(Rx_noise) = rx_noise?
Many thanks in advance!
Chen
0 commentaires
Réponses (1)
Kaashyap Pappu
le 21 Jan 2020
You can learn more about how the noise samples are generated by typing the following command in the command console:
edit awgn
Hope this helps!
0 commentaires
Voir également
Catégories
En savoir plus sur Propagation and Channel Models dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!