HDL coder mapping error

Hello,

I am trying to generate HDL code for a Xilix FPGA board using the HDL coder. I cannot say I understand the whole process in depth, but it has 5 stages that need to be executed in order and take care of the model built, the peripherals used on the board, the FPGA arrangement and so on. I consistently get the same error at the mapping stage, error log attached to the thread. The error follows me through models, even a simple unit delat with input and output, so I dare say it is not model-dependent.

From what Im gathering it has to do with a license error of either my Xilinx or my Windows. Has anyone encountered a simmilar error before, does anyone have solutions that work?

Thanks

Answer 1

[stozaki]

I look like you are using the ISE web pack. The web pack does not support xc6vlx240t. web pack supports only xclx75T. If you use a web pack, please change the target device to xclx75T

Please see following support device table.

https://www.xilinx.com/publications/matrix/Software_matrix.pdf

Answer 2

[Vasil Enev]

Hello,

I thought I am using the ISE Design Suite. I have it installed on my laptop and at the beginning of the process, the synthesis tool is specified as Xilinx ISE, see screenshot below:

If that is the problem, how do I change between solvers or boards. The board you suggested I should use is not available on the list of boards I have, and would be different than the one I am trying to program.

Thanks,

Vasil