Cannot find target PC in xPC
4 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hi all,
I'm having trouble setting up my laptop and a desktop to run xPC. The host seems to be having trouble finding the target. I'm using an HP tx1000 laptop as the host computer, and connecting via ethernet to a Dell intel desktop as the target. When I use the boot CD to boot into xPC on the desktop, it says "No supported pci ethernet board." I'm plugging into the built in ethernet on the target: do I need to use a separate PCI ethernet card?
When I try to compile my simulink model, it stops at "looking for target: TargetPC1."
I've assigned static IP addresses and entered those in for both the host and the target. (198.168.1.3 and 198.168.1.50 respectively.) The subnet mask is 255.255.255.0 and the TCP/IP is left blank.
The HP host laptop has a nforce motherboard with built in ethernet. The Target desktop has a Broadcom NetXtreme 57xx gigabit controller as the network adapter.
Does anyone have any ideas for troubleshooting these connections? Think there is an incompatibility issue? How would I get around that using a laptop with built in ethernet? (external card?)
All help much appreciated
0 commentaires
Réponse acceptée
Gordon Weast
le 18 Avr 2011
Adam,
Yes, Walter has it correct. The Broadcom card isn't supported on the target. We don't have a driver for it.
The laptop should be just fine, it's the target adapter that is the problem.
We're constantly adding support for more Ethernet adapters, but unfortunately, the Broadcom ones aren't on the list. We get these from the vendor for the real time kernel we're using and we can only offer what they make available to us.
We've got good support for many Intel GigaBit Ethernet boards. Take a look at: http://www.mathworks.com/products/xpctarget/xPC_Target_Supported_Ethernet_Chipsets.pdf for a discussion of what is supported.
0 commentaires
Plus de réponses (1)
Walter Roberson
le 17 Avr 2011
xPC only knows how to handle some kinds of ethernet cards. It appears the Broadcom NetXtreme 57xx is not one of them. You will probably have to look in the documentation to find a supported card and install that, and you will probably have to disable the built-in ethernet card in your BIOS.
1 commentaire
Arnaud Miege
le 17 Avr 2011
Walter's probably right. Have a look at the list of supported Ethernet chipsets:
http://www.mathworks.co.uk/products/xpctarget/supported-hardware/xPC_Target_Supported_Ethernet_Chipsets.pdf
Voir également
Catégories
En savoir plus sur Multicore Processor Targets dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!