How to Simulate Nonlinear Model Discrete Time?
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
This is My Nonlinear Model
function [PositionN, VelocityN, TorqueN] = traindiscretemodel(u,Tim_step,Position,Velocity,Torque,Mass,Ca_0,Ca_1,Ca_2,Tao,R,Eta)
% Train Model
PositionN = Position + Velocity*Tim_step;
VelocityN = Velocity + 1/Mass *(Eta*Torque/R - (Ca_0 + Ca_1*Velocity + Ca_2*Velocity^2))*Tim_step;
TorqueN = Torque - 1/Tao*Torque*Tim_step + 1/Tao*u*Tim_step;
end
This is parameters i used
clc;clear;close all;
Eta = 0.96;
% Parameter Massa
Mass = [8095;8500;8457;8500;8443;8396;8491];
Tim_step = 0.01;
R = [0.290736184319659;0.295289596853781;0.256349340814675;0.295668792806951;0.281617962311270;0.254877020249970;0.263924910943352];
Tao = [0.744417105917954;0.771737581122686;0.538096044888052;0.774012756841706;0.689707773867623;0.529262121499823;0.583549465660115];
Torquebound = [-3297.53650110286,3297.53650110286;-3517.25332991404,3517.25332991404;-1805.63954664794,1805.63954664794;-3535.78455981619,3535.78455981619;-2873.13552926226,2873.13552926226;-1748.36142518872,1748.36142518872;-2108.92205347325,2108.92205347325];
% Parameter Resistansi
Ca_0 = [5.2;5.2;5.2;5.2;5.2;5.2;5.2;];
Ca_1 = [0.038;0.038;0.038;0.038;0.038;0.038;0.038;];
Ca_2 = [0.00112;0.00112;0.00112;0.00112;0.00112;0.00112;0.00112;];
v0 = 20;
cd('G:\Ivan\Semester 10\Tugas Akhir II\matlab\Train Model Open Loop');
save parametersvalue.mat
with that discrete time model and parameters i used, I want simulated the model open loop. Can i used ode45?
0 commentaires
Réponses (0)
Voir également
Catégories
En savoir plus sur Assembly dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!