matrix dimension must agree and the size is different on left and right side. I need to iterate to observe cooling. Please help !
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
R_in =[0.02;1.0]; %total E Resistance
Keff = 1.5e-3; % W/K
rho = 10e-6; % ohm.meter
Sab = 200e-6; % Volt per Kelvin
N = [75];
% Ti = 200; % intiial temp
% Hhx = 0.004; % heat transfer Coef forced Air circulation
Ta = [50;10] ; % cooling side or being pumped in Kelvin
alpha =220e-6;% V/Keff seebecKeff coeff
I_in = [2:30];
V_in = [2:30];
W = V_in.*I_in;
T_pump_cold = 200.15; % final required temperature
T_sink = 173.15;
Tb = 298.15; % hot side initial temperature
DT = T_pump_cold - T_sink;
dx = 0.04; % in m
Q_c = 2*N*((Sab*T_pump_cold.*I_in) - 2*N*((Keff*rho)./R_in)*(DT)-0.5*(I_in.^2).*R_in)
COP = Q_c/W;
A_cr = 0.00002; % in m2
t(1) =1;
T(1)=T_pump_cold ;
Time2=(1:t:12); hours
for j = (1:t:1000)
[T(j+1)] = ((dx.*Q_c)./Keff.*Time2.*A_cr)+T(j);
end
0 commentaires
Réponses (0)
Voir également
Catégories
En savoir plus sur Heat and Mass Transfer dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!