How can I solve the problem of designing state observer when using model predictive control toolbox
8 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
When using the model predictive control toolbox, the matlab always says that,'Problems encountered when designing the overall state observer (Kalman filter)'. Is there anybody who can solve this problem? Thank you very much!!!!
0 commentaires
Réponses (2)
André Paradis
le 6 Juil 2014
For Model Predictive control purposes, your system must be observable in its state-space representation.
This being said, an observable system can become unobservable do to numerical errors. Thus, you could modify the state estimator gain using :
setestim(MPCobj,M);
Also, if your system is not defined in a state-space representation (e.g. TF), MATLAB will convert it to one. In this case, try using
MPCobj.Model.Plant=ss(model,'min');
Where your system will converted in its state-space representation with the minimal number of states.
Hope this helps
1 commentaire
fariba
le 27 Avr 2015
dear andre i have this problem with my mpc. what do you mean ,modify modify the state estimator gain? my gain in mpc is like below M =
1.0e+03 *
0.0013 -0.0134
0.0000 0.0001
0.1136 -1.1636
0.0000 0.0000
-0.0000 -0.0000
0.0000 0.0000
0.0000 -0.0000
-0.0003 0.0134
what should i do?
fariba
le 26 Avr 2015
dear andre i have this problem with my mpc. what do you mean ,modify modify the state estimator gain? my gain in mpc is like below M =
1.0e+03 *
0.0013 -0.0134
0.0000 0.0001
0.1136 -1.1636
0.0000 0.0000
-0.0000 -0.0000
0.0000 0.0000
0.0000 -0.0000
-0.0003 0.0134
what should i do?
0 commentaires
Voir également
Catégories
En savoir plus sur Controller Creation dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!