How can I plot the SNR graph?
14 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
studentmatlaber
le 1 Août 2021
Commenté : Sulaymon Eshkabilov
le 12 Août 2021
Hello to everyone. I want to create a Pd - SNR dB graph. I extracted the Probability detection formula. Here I took the power of the noise as a variable to generate Snr_dB. When L=100, the graph looks good, but as I enlarge the L value, my graph gets distorted. I couldn't understand why. When L values are 10,100,1000, I expect a graph similar to the one I will put below, but it breaks down except for the value of 100. I will be glad if you can help me by sharing the code. If there is something in the code that you don't understand, I can explain.
L=100;
thr=0.01;
snr_dB = [-25:2:20]; % SNR in decibels
snr = 10.^(snr_dB./10);
for k=1:length(snr)
n_sigma(k)=(0.0206+0.0074)/snr(k);
Pd_denklem(k) = (thr-L*(0.0206+n_sigma(k)+0.0074))/sqrt((L*(4*0.0074*(0.0206+n_sigma(k))+2*(0.0206+n_sigma(k))^2)));
pd(k)=qfunc(Pd_denklem(k));
end
plot(snr_dB,pd)
4 commentaires
Sulaymon Eshkabilov
le 2 Août 2021
I will try to rewrite the code according to your posted formulations.
Réponse acceptée
Sulaymon Eshkabilov
le 2 Août 2021
I have looked through your code that is written according to your provided formulations. That means that your provided formulations are not accurate. As we know that SNR = (Power of signal)/(Power of noise) and SNR (dB) = 10*log10( (Power of signal)/(Power of noise)). Thus, my advise is to verify your formulations carefully for once more. Particularly, a first formulation SNR = (S_x^2+M_x^2)/S_w^2 = (0.0206+0.0074)/n_sigma has to be checked. Moreover, what is N in your shown reference plot. In addition, the values of lambda and L should be taken carefully.
2 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Annotations dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!