Problem 58832. Find the Peak Particle Velocity on a ETL structure
PPV is a vibration parameter that can connect stress to a structure, it is measured in mm/s or mm/s-1. The higher the PPV the more stress to the structure. Common practices in power industries are to limit ground motion by specifying the maximum peak particle velocity (PPV). Electrical Tranmission Line (ETL) Structure's maximum PPV without having any damage to the structure is around 50.8mm/s.
There are many different equations for PPV, but all generally have the same variables. 2 site constants and 2 unknowns.
Use this equation to calculate PPV with k & e being the default site constants:
PPV = k(D/sqrt(Q) )^(-e)
k = 185
e = 1.2
D = distance from blast to structure (m)
Q = Charge of mass per delay (kg)
Solution Stats
Problem Comments
-
3 Comments
Christian Schröder
on 8 Aug 2023
There appears to be an minor mistake in your problem description, or alternatively your test suite: the formula given is
PPV = k(D/sqrt(Q) )^(-e)
and the value of e given is
e = -1.2
but the test suite only wants one minus sign: either it should be (...)^e in the formula instead, or e = 1.2.
Dyuman Joshi
on 8 Aug 2023
Christian, I checked the formula on the internet and corrected the problem statement according to the reference solution submitted by OP.
The value of e is 1.2.
Christian Schröder
on 8 Aug 2023
Thanks, Dyuman!
Solution Comments
Show commentsProblem Recent Solvers9
Suggested Problems
-
Fahrenheit to Celsius converter
553 Solvers
-
437 Solvers
-
536 Solvers
-
335 Solvers
-
105 Solvers
More from this Author3
Problem Tags
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!