Design and Tuning
Design antennas or arrays at desired frequency; add R, L, and C
components to antenna feed or arbitrary locations on antenna
surface
Design antennas or arrays from the catalogs to resonate at specified frequencies.
Loading antenna elements allows you to change the electrical properties of the antenna. Lumped elements are used to increase the antenna bandwidth without changing the dimensions of the antenna. Antenna loading involves adding a lumped inductor, capacitor or resistor. You can add these lumped elements to the antenna feed or arbitrary positions on the antenna surface.
Functions
design | Design prototype antenna or arrays for resonance around specified frequency |
lumpedElement | Lumped element circuit to load antenna |
You can also select a web site from the following list:
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)