Simulation au niveau liaison

Exemples de simulation et d’analyse de systèmes de communications au niveau liaison

Simulez des modèles de systèmes de communications au niveau liaison. Utilisez des simulations de taux d’erreur binaire pour analyser la réponse du système au bruit et aux interférences inhérents aux canaux de communication, explorer des scénarios hypothétiques et évaluer les compromis entre des architectures et paramètres système différents. La chaîne de traitement de la couche physique (PHY) prépare les données reçues des couches supérieures pour leur émission et récupère les données émises avant de les transmettre aux couches supérieures.

Les exemples présentés dans cette section illustrent l’émission du signal, les imperfections du signal inhérentes au canal radio et de propagation, la réception du signal, la récupération des données et l’analyse de la performance de la liaison.

Exemples présentés

Indoor MIMO-OFDM Communication Link Using Ray Tracing

Perform ray tracing in an indoor environment and use the results to build a channel model for a link level simulation with the MIMO-OFDM technique.

Ouvrir le live script

RF Satellite Link

Simulate a satellite link that models amplifier impairments by using a Memoryless Nonlinearity block.

Ouvrir le script

BER Simulations with Parallel Computing Toolbox

Improve the execution speed of communication systems involving BER simulations. To improve the performance of these systems, one of the available options is to parallelize the simulations. This example introduces the usage of the Parallel Computing Toolbox™ in BER simulations. It presents two possible ways of parallelizing BER simulations and recommends the better method.

Ouvrir le live script

QPSK Transmitter and Receiver

Simulate a QPSK transmitter and receiver.

Ouvrir le script

QPSK Transmitter and Receiver in Simulink

Model a QPSK transmitter and receiver in Simulink^®.

Ouvrir le modèle

End-to-End QAM Simulation with RF Impairments and Corrections

Visualization capabilities that show the effects of RF impairments and corrections in a satellite downlink.

Ouvrir le script

Introduction to MIMO Systems

Model Multiple-Input-Multiple-Output (MIMO) systems that use multiple antennas at the transmitter and receiver ends of a wireless communication system.

Ouvrir le script

DVB-S.2 Link, Including LDPC Coding in Simulink

The state-of-the-art channel coding scheme used in the second generation Digital Video Broadcasting standard (DVB-S.2), which is deployed by DIRECTV in the United States. The coding scheme is based on concatenation of LDPC (Low-Density Parity-Check) and BCH codes. LDPC codes, invented by Gallager in his seminal doctoral thesis in 1960, can achieve extremely low error rates near channel capacity by using a low-complexity iterative decoding algorithm. The outer BCH codes are used to correct sporadic errors made by the LDPC decoder.

Ouvrir le modèle

Estimate BER of QPSK in AWGN with Reed-Solomon Coding

Transmit Reed-Solomon encoded data using QPSK over an AWGN channel. Demodulate and decode the received signal and collect error statistics. Compute the theoretical bit error rate (BER) for coded and noncoded data. Plot the BER results to compare performance.

Ouvrir le live script

Apply OFDM in MIMO Simulation

OFDM in 2-by-2 MIMO simulation.

Ouvrir le live script

Parallel Concatenated Convolutional Coding: Turbo Codes

Characterize the performance of turbo codes over a noisy channel.

Ouvrir le modèle

Accelerate SISO Single-Carrier Link Simulation Using GPU

A comparison of four techniques which can be used to accelerate bit error rate (BER) simulations using System objects in the MATLAB® Communications Toolbox™ software. A small system, based on convolutional coding, illustrates the effect of code generation using the MATLAB® Coder™ product, parallel loop execution using parfor in the Parallel Computing Toolbox™ product, a combination of code generation and parfor, and GPU-based System objects.

Ouvrir le script

802.11ac Multiuser MIMO Precoding with WINNER II Channel Model

Transmit and receive processing for a IEEE^® 802.11ac™ multiuser downlink transmission over a WINNER II fading channel.

Ouvrir le script

OFDM Transmitter and Receiver

Simulate an end-to-end OFDM transmission system for a single-input, single-output (SISO) channel.

Ouvrir le live script