Conversion continue/discrète
Control System Toolbox™ contient des commandes permettant le rééchantillonnage de modèles de systèmes dynamiques ou leur conversion entre les domaines en temps continu et en temps discret.
Tâches du Live Editor
| Conversion de la fréquence du modèle | Convertir des modèles à temps continu en modèles à temps discret et inversement, et rééchantillonner les modèles dans Live Editor |
Fonctions
c2d | Conversion de modèle du temps continu au temps discret |
d2c | Convert model from discrete to continuous time |
d2d | Resample discrete-time model |
upsample | Upsample discrete-time models |
c2dOptions | Specify discretization method for continuous-time to discrete-time conversions |
d2cOptions | Create option set for discrete- to continuous-time conversions |
d2dOptions | Create option set for discrete-time resampling |
Rubriques
- Discretizing and Resampling Models
This example shows how to use the commands for continuous/discrete, discrete/continuous, and discrete/discrete conversions.
- Discretize a Compensator
This example shows how to convert a compensator from continuous to discrete time using several discretization methods, to identify a method that yields a good match in the frequency domain.
- Discretizing a Notch Filter
This example shows the comparison of several techniques for discretizing a notch filter.
- Improve Accuracy of Discretized System with Time Delay
This example shows how to improve the frequency-domain accuracy of a system with a time delay that is a fractional multiple of the sample time.
- Convert Discrete-Time System to Continuous Time
This example shows how to convert a discrete-time system to continuous time using
d2c, and compare the results using two different interpolation methods. - Continuous-Discrete Conversion Methods
Choose discretization and interpolation methods for converting between continuous and discrete models.
- Upsample Discrete-Time System
This example shows how to upsample a system using both the
d2dandupsamplecommands and compare the results of both to the original system. - Choosing a Resampling Command
Use resampling commands to change the sample time of a discrete-time system.
