DSP System Toolbox™ provides algorithms, apps, and scopes for designing, simulating, and analyzing signal processing systems in MATLAB® and Simulink®. You can model real-time DSP systems for communications, radar, audio, medical devices, IoT, and other applications.
With DSP System Toolbox you can design and analyze FIR, IIR, multirate, multistage, and adaptive filters. You can stream signals from variables, data files, and network devices for system development and verification. The Time Scope, Spectrum Analyzer, and Logic Analyzer let you dynamically visualize and measure streaming signals. For desktop prototyping and deployment to embedded processors, including ARM® Cortex® architectures, the toolbox supports C/C++ code generation. It also supports bit-accurate fixed-point modeling and HDL code generation from filters, FFT, IFFT, and other algorithms.
Algorithms are available as MATLAB functions, System objects, and Simulink blocks.
This example shows how to use System objects to do streaming signal processing in MATLAB®.
This example shows how to lowpass filter a noisy signal in MATLAB® and visualize the original and filtered signals using a spectrum analyzer.
This example shows how to lowpass filter a noisy signal in Simulink and visualize the original and filtered signals with a spectrum analyzer.
This example shows how to design lowpass filters.
This example shows how to filter a noisy chirp signal with a lowpass filter that has a tunable passband frequency.
This example shows how to design filters for decimation and interpolation of discrete sequences.
Perform multirate filtering using rate conversion objects and blocks.
Accelerate signal processing algorithm with
Compute the power spectrum using the
dsp.SpectrumEstimator System objects.
You can estimate the transfer function of an unknown system based on the system's measured input and output data.
Compute the spectrogram and show the effect of RBW on the spectral data.
This example shows how to visualize and measure signals in the time and frequency domain in MATLAB® using a time scope and spectrum analyzer.
Obtain measurements data from dsp.SpectrumAnalyzer System object.
Obtain measurements data from Spectrum Analyzer block.
This example shows how to design filters for use with fixed-point input.
This example shows how to use the MATLAB Compiler™ to create a standalone application from a MATLAB function that uses System objects from DSP System Toolbox™.
This example shows how to generate a standalone executable for streaming statistics using MATLAB Coder™ and tune the generated executable using a user interface (UI) that is running in MATLAB (TM).
This example shows how to model an algorithm specification for a three band parametric equalizer which will be used for code generation.
This example shows how to implement a programmable FIR filter for hardware.
Shows how to configure the Simulink environment for use in signal processing models.
Introduction to real-world sample- and frame-based signals, and how to model those signals in MATLAB and Simulink.
Configure the Simulink environment to minimize delay and increase simulation performance.
Create a variable-size signal whose size, values cam change during a simulation.
As you construct a model you can experiment with block parameters, such as the coefficients of a Transfer Fcn block, to help you decide which blocks to use.
Discusses advantages of fixed-point development in general and of fixed-point support in System Toolbox software in particular, as well as lists common applications of fixed-point signal processing development.
Frame-Based Processing in Simulink
How to process signals as frames in Simulink.