SPI Interface

Use the BeagleBone^® Black SPI interface

Use BeagleBone Black SPI interface to connect to and control devices

Objects

`beaglebone`	Connection to BeagleBone Black hardware
`spidev`	Connection to SPI device on BeagleBone Black hardware

`clear`	Terminate connection to BeagleBone Black hardware
`showAllPins`	Show diagram of all pins
`showPins`	Show diagram of GPIO pins
`enableSPI`	Enable SPI interface
`writeRead`	Write data to and read data from SPI device

Use BeagleBone Black SPI Interface to Connect to Device
Use the SPI interface on the BeagleBone Black hardware.
BeagleBone Black SPI Interface
SPI interface on the BeagleBone Black hardware.
BeagleBone Black Pin Map
Detailed description of BeagleBone Black pin map.

SPI bus 1 shares pins with HDMI, which is enabled by default.

Use the SPI peripheral on BeagleBone Black® hardware to connect to an MCP3008 10-bit 8-channel ADC.