Even and Odd parts
92 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Function that gives the even and the odd parts of any given signal
1 commentaire
Mashhood Saeed
le 18 Nov 2021
n=-5:5;
yn= 0*(n<0)+1*(n==0)+1*(n>0);
yflip=fliplr(yn);
subplot(3,1,1);
stem(n,yn,'r');
title('plot of yn');
xlabel('time');
ylabel('yn');
ye = (1/2)*(yn+yflip);
subplot(3,1,2);
stem(n,ye,'b');
title('plot of even');
xlabel('time');
ylabel('y even');
yo= (1/2)*(yn-yflip);
subplot(3,1,3);
stem(n,yo);
title('plot of odd');
xlabel('time');
ylabel('y odd');
Réponses (8)
Azzi Abdelmalek
le 18 Nov 2013
t=-10:10; %vector time
x=rand(1,numel(t)); % Your signal
xmt=[fliplr(x(t>=0)) fliplr(x(t<0))]
xe=0.5*(xmt+x)
xo=0.5*(x-xmt)
subplot(3,1,1);
plot(t,x);
title('Your signal x')
subplot(3,1,2);
plot(t,xe);
title('Even part')
subplot(3,1,3);
plot(t,xo);
title('Odd part')
2 commentaires
suhaib Dawood
le 23 Sep 2016
If you have heaviside function what to do to find the even and odd portion ?
JUGAL SUGGALA 17BEC0423
le 30 Août 2018
Please can you explain each command or function briefly, how it is working as i am not able to understand the code.
Siddharth Mishra
le 4 Nov 2019
clc;
clear all;
close all;
x=input("enter the values");
n=0:length(x)-1;
n1=(1-length(x))*0.5:(length(x)-1)*0.5;
y=flip(x);
y
x
x_e=(x+y)*0.5;
x_e
x_o=(x-y)*0.5;
x_o
subplot(311)
stem(n1,x);
title('ACTUAL SIGNAL');
subplot(312)
stem(n1,x_e);
title('EVEN SIGNAL');
subplot(313)
stem(n1,x_o);
title('ODD SIGNAL');
0 commentaires
Sean de Wolski
le 18 Nov 2013
signal = rand(1000,1);
even = signal(2:2:end);
odd = signal(1:2:end);
Like this?
Sandeep Maurya
le 7 Sep 2017
n=-10:15; x=[zeros(1,10) ones(1,10) zeros(1,0)]; m=fliplr(n); m1=min([m,n]); m2=max([m,n]); n1=1:length(n); x1=zeros(1,length(m)); x1(n1+nm)=x: x=x1; xe=0.5*(x+fliplr(x)); xo=0.5*(x-fliplr(x)); figure; t=-15:15; subplot(3,1,1);stem(t,x); axis([-15 15 0 1.5]); title('ORIGINAL SIGNAL'); subplot(3,1,2); stem(t,xe); title('Even signal X(n)'); subplot(3,1,3); stem(t,xo); axis([-15 15 -1 1]); xlabel('-----Time-----'); ylabel('--Amplitude--'); title('Odd part of signal');
1 commentaire
Walter Roberson
le 4 Nov 2019
The phrase
x1(n1+nm)=x: x=x1
is invalid. It would probably be valid if a semi-colon were used instead of a colon.
Christian Stoddard
le 10 Fév 2019
myeven = @(x) (1/2)*(myfun(x)+myfun(-x));
myodd = @(x) (1/2)*(myfun(x)-myfun(-x));
0 commentaires
sushma medabalimi
le 29 Août 2019
tmin=-10; dt=0.1; tmax=10;
t=tmin:dt:tmax;
a = 2;
% Generate exponential signal
x1 = exp(a*t);
%Perform time reversal operation
x2 = exp(-a*t);
%Condition to check odd signal
if(x2==x1)
disp('The given signal is even signal')
else if (x2==(-x1))
disp('The given signal is an odd signal')
else
disp('The given signal is neither even nor odd signal')
end
end
0 commentaires
Kshitiz
le 4 Oct 2019
clc;
close all;
clear all;
prompt = 'Enter the values';
x=input(prompt)
x_dash=flip(-x);
t1=0:1:length(x)-1;
t1_dash=flip(-t1);
for i=1:length(x)
odd(i)=x_dash(i)/2;
end
for i=2:length(x)
odd(i+length(x))=x(i)/2;
end
odd(length(x))=0;
for i=1:length(x)
t(i)=t1_dash(i);
end
for i=1:length(x)
t(i+length(x))=t1(i);
end
length(t)
length(odd)
subplot(311)
stem(t,odd)
xlim([-10 10])
title('ODD SIGNAL');
x_dash=flip(x);
t1=0:1:length(x)-1;
t1_dash=flip(-t1);
for i=1:length(x)
odd(i)=x_dash(i)/2;
end
for i=1:length(x)
odd(length(x))=x(i)/2;
end
odd(length(x)+1)=x(1);
for i=1:length(x)
t(i)=t1_dash(i);
end
for i=1:length(x)
t(length(x))=t1(i);
end
length(t)
length(odd)
length(odd)
subplot(312)
stem(t,odd)
xlim([-10 10])
title('EVEN SIGNAL');
subplot(313)
stem(t1,x)
xlim([-10 10])
title('ACTUAL SIGNAL')
0 commentaires
MD asgar
le 18 Juil 2020
Consider the discrete function x=4*sin(t)+2*cos(t), Write the Matlab code to evaluate the odd even part of Y and plot the subplots in a single plot.
1 commentaire
Walter Roberson
le 18 Juil 2020
You should start a new Question for that.
Voir également
Catégories
En savoir plus sur Denoising and Compression dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!