- FFT Calculation and Plotting: The magnitude of the FFT should be plotted in the frequency domain rather than attempting to plot the FFT result directly against the time axis.
- Frequency Axis: The correct frequency axis for plotting the FFT result needs to be constructed.
- Time Shifting: Ensure that the time shifts are correctly applied and interpreted.
How to plot simple fft of a shifted time series?
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I am trying to understand basic fft functions of a shifted time series and my graphs are not appearing as I expect them to:
dt = 0.01; % time interval N_ts = 256; % number of time data Td_ts = 2.*(N_ts-1)*dt; % duration t_ts = 0:dt:Td_ts; % define time axis x_ts = zeros(1, length(t_ts)); %Initialize x_ts2 = zeros(1, length(t_ts)); %Initialize t0 = 100; t1 = 156; x_ts(t0)= 1/dt; % time shift of x(t+t0) x_ts2(t1) = 1/dt; % time shift of x(t-t0)
nfft_ts = 511; % Length of FFT X2_ts = fft(x_ts2,nfft_ts)*dt; % Take fft, padding with zeros so that Length(x) is equal to nfft
amp2 = abs(X2_ts); % Take the magnitude of fft of x phase2 = angle(X2_ts); % Take angle
figure(5); plot(t_ts,X2_ts); title('Built-In FFT'); xlabel('Time (s)'); ylabel('X(t)');
0 commentaires
Réponses (1)
Pratik
le 26 Juin 2024
Hi Kelsey,
To plot the FFT of a shifted time series and understand its behavior, it is important to ensure that the time and frequency domains are correctly handled. The current code has a few issues that need to be addressed:
Here is the corrected and complete code for plotting the FFT of a shifted time series:
dt = 0.01; % time interval
N_ts = 256; % number of time data
Td_ts = (N_ts-1)*dt; % duration
t_ts = 0:dt:Td_ts; % define time axis
x_ts = zeros(1, length(t_ts)); % Initialize x_ts
x_ts2 = zeros(1, length(t_ts)); % Initialize x_ts2
t0 = 100; % Index for time shift of x(t+t0)
t1 = 156; % Index for time shift of x(t-t0)
x_ts(t0) = 1/dt; % time shift of x(t+t0)
x_ts2(t1) = 1/dt; % time shift of x(t-t0)
nfft_ts = 511; % Length of FFT
X2_ts = fft(x_ts2, nfft_ts) * dt; % Take fft, padding with zeros so that Length(x) is equal to nfft
amp2 = abs(X2_ts); % Take the magnitude of fft of x
phase2 = angle(X2_ts); % Take angle
% Frequency axis
f_ts = (0:nfft_ts-1)/(nfft_ts*dt); % Frequency axis in Hz
% Plotting the magnitude of the FFT
figure;
plot(f_ts, amp2, 'LineWidth', 1.5);
title('Magnitude of FFT of Shifted Time Series');
xlabel('Frequency (Hz)');
ylabel('Magnitude');
grid on;
% Plotting the phase of the FFT
figure;
plot(f_ts, phase2, 'LineWidth', 1.5);
title('Phase of FFT of Shifted Time Series');
xlabel('Frequency (Hz)');
ylabel('Phase (radians)');
grid on;
I hope this helps!
0 commentaires
Voir également
Catégories
En savoir plus sur Fourier Analysis and Filtering dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!