xpctarget ping fails

Hi,

I have 2 target PCs - T1 and T2.

I configured 'xpcexplr' and boot both PCs. (all configurations are the same but only with different IPs)

Both PCs succesfully boot into the xPC environment.

However, in the xPC environment, 'xpctargetping' fails for T2 but success for T1.

Any ideas why?

Thanks in advance.

Answer 1

[James]

Additional info: For both PCs I can ping from the DOS environment. Crossover cable is used. Direct connection between host and target PCs.

Answer 2

[Kaustubha Govind]

I don't have much personal experience with this, but this documentation page might help: xpctest: Test 2 Fails.

[James]

Hi, Thanks for your suggestion. I've checked the IP and ethernet cards. They should be alright.

Answer 3

[Arnaud Miege]

How do you use xpctargetping? If you just run xpctargetping without any arguments, it will ping only the default target defined in xPC Target Explorer. To ping other targets, you need to specify the IP address of the target PC explicitly, see xpctargetping for more information.

HTH

Arnaud