Using Thorlabs DPC5500 with Matlab
4 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Has anyone been able to interface the Thorlabs DPC5500 polarization controller with Matlab? The system uses VISA-TCPIP drivers, but after connecting the device, i cannot read any data out of the device. I used the NI I/O Trace application to look at the communications and it seems the viOpenDefaultRM session address is wrong. Is there a way of telling matlab to use specific session addresses? I suspect part of the problem is that matlab is using a generic type visa instrument, and there are no Thorlab instruments. Does anyone know of a good tutorial on how to create a new visa instrument in matlab? any information will be of great help.
0 commentaires
Réponses (3)
Vinod
le 4 Juil 2014
I think you need to look at the manual for the thorlabs device and see if the commands you are sending to get the instrument to respond are correct. I usually start with the *IDN? query and see if that works.
0 commentaires
Vinod
le 14 Juin 2014
Can you point me to the driver you are using? Also if you haven't already, take a look at the documentation on using drivers in MATLAB .
0 commentaires
Voir également
Catégories
En savoir plus sur Instrument Control Toolbox dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!