Communicate with FANUC CNC machine
4 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hienbn
le 13 Août 2014
Commenté : Salaheddin Hosseinzadeh
le 18 Août 2014
Dear All,
I'm trying to communicate with a FANUC CNC machine using TCP/IP by MATLAB. I have to read the current value of X-axis, Y-axis of the machine which are can be done by reading macro variables such as: #500, #501. But I don't how to start, what kind of knowledge I should have to do that. So my questions are:
1) Can Matlab do this works.
2) Can you give me some hints, links, tutorials to do that?
3) What kinds of knowledge should I have to that?
Please help me and thank you so much.
0 commentaires
Réponse acceptée
Salaheddin Hosseinzadeh
le 14 Août 2014
Hi
You can definitely do this with MATLAB.
You need to have the IP address of your CNC device, if you don't know it refer to it's manual or somehow manually you should be able to see the IP address on the device. you need to create a TCP/IP session this link will help you how to do it with matlab, you need the IP address in this step.
Then you can send commands and receive the messages and information.
Hope this helps.
Good Luck!
0 commentaires
Plus de réponses (1)
Voir également
Catégories
En savoir plus sur Application Deployment dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!