Making a line thought points plotted from for loop in MATLAB

I am trying to connect the data points that are obtained from the following code, but am not able to. How do I connect the points?

clc;
clear all

R1= 1399.580e+6;

C1= 374.868e-6;

R2= 1497.005e+6;

C2= 350.472e-6;

R3= 19573.407e+6;

C3= 2429.373e-12;

R0= 1354.967e+6;

C0= 15.94e-9;

hold on

for f =[0.001 0.005 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000] 

  
W = 2*pi*f;

Cr=(C0)+(C1)/(1+(W*R1*C1)^2)+(C2)/(1+(W*R2*C2)^2)+(C3)/(1+(W*R3*C3)^2);

Ci=1/(W*R0)+(W*R1*C1^2)/(1+(W*R1*C1)^2)+(W*R2*C2^2)/(1+(W*R2*C2)^2)+(W*R3*C3^2)/(1+(W*R3*C3)^2);

tan_del = Ci/Cr
f

set(gca, 'XScale', 'log')
plot([f],[tan_del],'-x','linewidth',10)
xlabel('Freq in log')
ylabel('tan_del in lin')
line(f,tan_del,'Color', 'r','linewidth',10)
end

hold off

Answer 1

[Alan Stevens]

Like this?

R1= 1399.580e+6;

C1= 374.868e-6;

R2= 1497.005e+6;

C2= 350.472e-6;

R3= 19573.407e+6;

C3= 2429.373e-12;

R0= 1354.967e+6;

C0= 15.94e-9;

f =[0.001 0.005 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000];

  
W = 2*pi*f;

Cr=(C0)+(C1)./(1+(W*R1*C1).^2)+(C2)./(1+(W*R2*C2).^2)+(C3)./(1+(W*R3*C3).^2);

Ci=1./(W*R0)+(W*R1*C1^2)./(1+(W*R1*C1).^2)+(W*R2*C2^2)./(1+(W*R2*C2).^2)+(W*R3*C3^2)./(1+(W*R3*C3).^2);

tan_del = Ci./Cr;

semilogx(f,tan_del,'x',f,tan_del,'r')
xlabel('Freq in log')
ylabel('tan_del in lin')

[SSK]

Yes. Thank you so much. When I removed the for loop I was getting an error that matrix dimensions do not match. Yours is working very well. Thanks again.