I want to find rate constant from function fminsearch.
4 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
clear all
t=15,30,60,120,240; %min
dCHMF/dt= -k1CHMF;
dCHMFCA/dt= -k2CHMFCA+k1CHMF;
dCFFCA/dt= -k3CFFCA+k2CHMFCA;
dCFDCA/dt= k4CFDCA;
CHMF initial =0.1 %mol/L
Conc.(mol/L)
t HMF HMFCA FFCA FDCA
15 0.04401 0.00127 0.00120 0.00000
30 0.04924 0.00097 0.00269 0.00000
60 0.03023 0.00575 0.00540 0.00005
120 0.03132 0.00877 0.01296 0.00007
240 0.04457 0.00053 0.00278 0.00000
objective function as follow from this equation.
I want to find k1,k2,k3 and k4 from fuction fminsearch.
2 commentaires
John D'Errico
le 22 Jan 2022
Modifié(e) : John D'Errico
le 22 Jan 2022
5 data points, and you want to estimate 4 unknown parameters?
I would note that you spedify only ONE of the initial values, and there must be 4 initial values specified to solve any such problem.
Are those data points known EXACTLY, with no error at all? Surely not, since one of the species has concentration 0 at 4 of the 5 points. I wish you good luck.
Réponses (1)
John D'Errico
le 22 Jan 2022
Here is a start. First, fminsearch will probably be a poor solver to use here. At least, make sure you have good starting values.
ANd since you have not specified initial values for the ODE, I'll assume they are all zero except for the one you DID specify.
syms CHMF(t) CHMFCA(t) CFFCA(t) CFDCA(t) k1 k2 k3 k4
EQ = [diff(CHMF) == -k1*CHMF;...
diff(CHMFCA) == -k2*CHMFCA+k1*CHMF;...
diff(CFFCA) == -k3*CFFCA+k2*CHMFCA;...
diff(CFDCA) == k4*CFDCA];
IC = [CHMF(0) == 0.1, CHMFCA(0) == 0, CFFCA(0) == 0, CFDCA(0) == 0];
sol = dsolve(EQ,IC)
You should see that the last component is identically zero, since it started out at zero concentration. That leaves you with 3 unknowns, and 5 data points for them on each curve. But the nice thing is, you now need not use an ode solver, since the analytical solution was easy to arrive at.
Just use an nonlinear least squares solver you want to use.
3 commentaires
Torsten
le 22 Jan 2022
Add the lines
sol.CHMF
sol.CHMFCA
sol.CFFCA
sol.CFDCA
after
sol = dsolve(EQ,IC)
Voir également
Catégories
En savoir plus sur Calculus dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!