Problem with raspi() function on raspberry pi4 B

13 vues (au cours des 30 derniers jours)
Kaoane Jondeau
Kaoane Jondeau le 25 Mar 2022
Hello,
I try to use the MATLAB Support Package for Raspberry Pi Hardware with my brand new raspberry pi 4B. I started trying to use the Mathworks raspbian image but it doesn't seems to be compatible with my board, as I get a message at boot telling me to try another OS (don't want to start). Thus I installed different OS and chose to "customize the existing operating system" option. The installation goes to the end (wiringpi library fails to install but I don't think that the error is coming from that). Then when I use the raspi() command I get the following error :
### Updating Raspberry Pi I/O server...
### Connecting to board...
### Connected to 192.168.0.35...
### Installing userland software (this might take a while)...
### Creating server folder...
### Transferring source files...
### Building MATLAB I/O server...
Error executing command "make ONLY_MATLAB_IO=1 -C /opt/MATLAB/mw_server_v20.2.0 -f Makefile". Details:
STDERR: IO_wrapperv4l2.c: In function v4l2CameraInitialize:
IO_wrapperv4l2.c:43:9: warning: implicit declaration of function ‘printf’ [-Wimplicit-function-declaration]
printf("Webcam: Initialized successfully \n");
^~~~~~
IO_wrapperv4l2.c:43:9: warning: incompatible implicit declaration of built-in function ‘printf’
IO_wrapperv4l2.c:43:9: note: include <stdio.h>or provide a declaration of ‘printf’
IO_wrapperv4l2.c:11:1:
+#include <stdio.h>
IO_wrapperv4l2.c:43:9:
printf("Webcam: Initialized successfully \n");
^~~~~~
IO_wrapperv4l2.c:45:9: warning: incompatible implicit declaration of built-in function ‘printf’
printf("Webcam: Initialization failed \n");
^~~~~~
IO_wrapperv4l2.c:45:9: note: include <stdio.h>or provide a declaration of ‘printf’
IO_wrapperv4l2.c: In function v4l2CameraSnapshot:
IO_wrapperv4l2.c:96:5: warning: incompatible implicit declaration of built-in function ‘printf’
printf("Webcam: Sent an image of framesize %u \n",payloadSize);
^~~~~~
IO_wrapperv4l2.c:96:5: note: include <stdio.h>or provide a declaration of ‘printf’
v4l2_cam.c: In function EXT_webcamInit:
v4l2_cam.c:900:26: warning: unused variable ‘imageHeight’ [-Wunused-variable]
uint32_T imageWidth, imageHeight;
^~~~~~~~~~~
v4l2_cam.c:900:14: warning: unused variable ‘imageWidth’ [-Wunused-variable]
uint32_T imageWidth, imageHeight;
^~~~~~~~~~
v4l2_cam.c:898:9: warning: unused variable ‘ret’ [-Wunused-variable]
int ret = 0;
^~~
In file included from v4l2_cam.c:21:
At top level:
availableWebcam.h:29:36: warning: numSupportedResdefined but not used [-Wunused-variable]
static int numberOfConnetions = 0, numSupportedRes[10];
^~~~~~~~~~~~~~~
availableWebcam.h:29:12: warning: numberOfConnetionsdefined but not used [-Wunused-variable]
static int numberOfConnetions = 0, numSupportedRes[10];
^~~~~~~~~~~~~~~~~~
IO_wrapperCameraboard.c: In function camerboardInitialize:
IO_wrapperCameraboard.c:38:19: warning: pointer targets in assignment from ‘uint8_T *’ {aka ‘unsigned char *’} to ‘char_T *’ {aka
char *} differ in signedness [-Wpointer-sign]
controlParams = &payloadBufferRx[index];
^
IO_wrapperCameraboard.c:41:5: warning: implicit declaration of function ‘printf’ [-Wimplicit-function-declaration]
printf("REQUEST_CAMERABOARD_INIT: (w, h, fps, q) = [%d, %d, %d, %d]\n", width, height,
^~~~~~
IO_wrapperCameraboard.c:41:5: warning: incompatible implicit declaration of built-in function ‘printf’
IO_wrapperCameraboard.c:41:5: note: include <stdio.h>or provide a declaration of ‘printf’
IO_wrapperCameraboard.c:11:1:
+#include <stdio.h>
IO_wrapperCameraboard.c:41:5:
printf("REQUEST_CAMERABOARD_INIT: (w, h, fps, q) = [%d, %d, %d, %d]\n", width, height,
^~~~~~
IO_wrapperCameraboard.c: In function cameraboardSnapshot:
IO_wrapperCameraboard.c:66:5: warning: incompatible implicit declaration of built-in function ‘printf’
printf("REQUEST_CAMERABOARD_SNAPSHOT \n");
^~~~~~
IO_wrapperCameraboard.c:66:5: note: include <stdio.h>or provide a declaration of ‘printf’
IO_wrapperCameraboard.c: In function cameraboardControl:
IO_wrapperCameraboard.c:95:19: warning: pointer targets in assignment from ‘uint8_T *’ {aka ‘unsigned char *’} to ‘char_T *’ {aka
char *} differ in signedness [-Wpointer-sign]
controlParams = &payloadBufferRx[0];
^
IO_wrapperCameraboard.c:96:5: warning: incompatible implicit declaration of built-in function ‘printf’
printf("REQUEST_CAMERABOARD_CONTROL: %s \n", controlParams);
^~~~~~
IO_wrapperCameraboard.c:96:5: note: include <stdio.h>or provide a declaration of ‘printf’
IO_wrapperCameraboard.c: In function cameraboardTerminate:
IO_wrapperCameraboard.c:118:5: warning: incompatible implicit declaration of built-in function ‘printf’
printf("REQUEST_CAMERABOARD_TERMINATE \n");
^~~~~~
IO_wrapperCameraboard.c:118:5: note: include <stdio.h>or provide a declaration of ‘printf’
availableWebcam.c: In function getCameraResolution:
availableWebcam.c:156:11: warning: unused variable ‘search’ [-Wunused-variable]
char *search = "x";
^~~~~~
availableWebcam.c:155:11: warning: unused variable ‘token’ [-Wunused-variable]
char *token;
^~~~~
availableWebcam.c:153:16: warning: unused variable ‘indx_count’ [-Wunused-variable]
static int indx_count = 0;
^~~~~~~~~~
availableWebcam.c: In function getCameraAddrIndex:
availableWebcam.c:145:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
availableWebcam.c: In function validateResolution:
availableWebcam.c:226:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
At top level:
availableWebcam.c:153:16: warning: indx_countdefined but not used [-Wunused-variable]
static int indx_count = 0;
^~~~~~~~~~
picam.c:10:10: fatal error: bcm_host.h: No such file or directory
#include "bcm_host.h"
^~~~~~~~~~~~
compilation terminated.
make: *** [Makefile:81: obj/picam.o] Error 1
STDOUT: make: Entering directory '/opt/MATLAB/mw_server_v20.2.0'
[Compiling] GPIO.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ GPIO.c -o
obj/GPIO.o
[Compiling] IO_wrapperv4l2.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ IO_wrapperv4l2.c
-o obj/IO_wrapperv4l2.o
[Compiling] MW_PWM.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ MW_PWM.c -o
obj/MW_PWM.o
[Compiling] MW_pigs.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ MW_pigs.c -o
obj/MW_pigs.o
[Compiling] devices.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ devices.c -o
obj/devices.o
[Compiling] sharedServer.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ sharedServer.c
-o obj/sharedServer.o
[Compiling] v4l2_cam.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ v4l2_cam.c -o
obj/v4l2_cam.o
[Compiling] IO_wrapperCameraboard.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_
IO_wrapperCameraboard.c -o obj/IO_wrapperCameraboard.o
[Compiling] LED.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ LED.c -o
obj/LED.o
[Compiling] MW_SPI.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ MW_SPI.c -o
obj/MW_SPI.o
[Compiling] availableWebcam.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_
availableWebcam.c -o obj/availableWebcam.o
[Compiling] picam.c
gcc -c -g -O0 -D_DEBUG -Wall -I/opt/userland -I/opt/userland/host_applications/linux/libs/bcm_host/include
-I/opt/userland/interface/vcos -I/opt/userland/interface/vcos/pthreads -I/opt/userland/interface/vmcs_host/linux
-I/opt/userland/host_applications/linux/apps/raspicam -I/opt/nanomsg/include -Winline -pipe -D_DEBUG -D_MATLABIO_ picam.c -o
obj/picam.o
make: Leaving directory '/opt/MATLAB/mw_server_v20.2.0'
I tried with buster, bullseye and ubuntu OS and the error is the same everywhere. Am I doing something wrong or is the package not supporting PI4 B ? Thanks a lot for your help.
  1 commentaire
Ian Field
Ian Field le 3 Avr 2022
Modifié(e) : Ian Field le 3 Avr 2022
I'm getting the exact same error on a pi 3 B. I also used the "customize the existing operating system" option and had the wiringpi.h library fail to install.

Connectez-vous pour commenter.

Réponses (1)

Esha Chakraborty
Esha Chakraborty le 6 Avr 2022
Hi Kaoane,
I understand that you are experiencing raspi() makefile error while connecting to raspberry pi 4 board.
I can see that bcm_host.h file is missing in paticular, which is likely to cause this error. You can find solution to this from a similar example in the link below:
This is likely to resolve your issue.

Catégories

En savoir plus sur MATLAB Support Package for Raspberry Pi Hardware dans Help Center et File Exchange

Produits


Version

R2020b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by