How to measure the output impedance of single-phase and three-phase inverters connected to the grid?
29 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Jefferson
le 25 Mai 2022
Modifié(e) : Subin Puthenkalam
le 28 Juin 2022
I need a method to measure the output impedance of single-phase and three-phase grid-connected inverters and then build the Bode diagram for the measured impedance.
Additionally, I am also interested in measuring the impedance seen by the grid.
The model I built was created in the following library: Simscape / Electrical / Specialized Power Systems
The schematic figure of the single-phase case is this:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1010470/image.png)
0 commentaires
Réponse acceptée
Joel Van Sickel
le 13 Juin 2022
I would start with this block: https://www.mathworks.com/help/physmod/sps/powersys/ref/impedancemeasurement.html
but more generically, you can use the frequency response estimator tool in simulink control design to extract frequency response of your circuit as well. Here are some useful links if you want to look at more customizeable options:
Regards,
Joel
2 commentaires
Subin Puthenkalam
le 28 Juin 2022
Modifié(e) : Subin Puthenkalam
le 28 Juin 2022
Hello Jefferson,
can you show how your impedance measurement result looks like?
Does it has resonance points?
Thanks in advance
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Simscape Electrical dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!