The model of the dehumidifier based on the Peltier element
5 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hello!
Please tell me how to simulate the operation of an air dryer using a Peltier device from the Simscape Electrical library. It is necessary to drain the closed volume of air.
At the moment I am trying to ensure that one side of the Peltier element cools and the other heats up, but this does not happen. Both sides of the Peltier device are heated. At the same time, the parameter settings of the Peltier element are by default, the voltage that I supply is 12V. Thermal mass units that are connected to the ports of the Peltier element are radiators. I'm applying a model that I made.
I will be very grateful for your help!
0 commentaires
Réponses (1)
Yifeng Tang
le 15 Juil 2022
Looks like a parametrization issue here. In the provided model, the peltier device has ~600Amp going through, and that's a lots of heat from the 1/2*I^2*R term for both Q_A and Q_B, and both terms are negative (meaning sending heat out to thermal mass). If you set the Seebeck to a much larger value, the cold side does drop in temperature.
So I guess getting some more realistic parameters will help.
0 commentaires
Voir également
Catégories
En savoir plus sur Foundation and Custom Domains dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!