Effacer les filtres
Effacer les filtres

Contour Plotting form the text file for x and y coordinates values

4 vues (au cours des 30 derniers jours)
Yashvardhan Bhati
Yashvardhan Bhati le 22 Août 2022
Commenté : Chunru le 22 Août 2022
I have a text file whcih contains the data for the x and y coordinates and for each coordinate i have vx,vy, and other quantities. I would like to have spatial plot or contour. I tried using contour f plot but it says Z must be 2*2 matrix whcih i dont understand as Z here is my data of velocity.
Below is how my entires look like.
XC,YC,VX,VY,Omegaz,NP
-51.0,3.0,0.0,0.0,0.0,0.0
-51.0,3.25,0.0,0.0,0.0,0.0
-51.0,3.5,0.0,0.0,0.0,0.0
-51.0,3.75,0.0,0.0,0.0,0.0
-51.0,4.0,0.0,0.0,0.0,0.0
-51.0,4.25,0.0,0.0,0.0,0.0
can you help me with the how to proceed with it. This is what i have bene trying to do.
A1=readtable('Plug.txt','ReadVariableNames',true);
AA1=table2array(A1);
X1=AA1(1:1378,1);
Y1=AA1(1:1378,2);
VY1=AA1(1:1378,4);
contourf(X1,Y1,VY1)
  4 commentaires
Chunru
Chunru le 22 Août 2022
Then a portion of data enough for demonstrating the code.
Yashvardhan Bhati
Yashvardhan Bhati le 22 Août 2022
Modifié(e) : Yashvardhan Bhati le 22 Août 2022
Please check if the file is sufficient or not.

Connectez-vous pour commenter.

Réponse acceptée

Chunru
Chunru le 22 Août 2022
T = readtable("https://www.mathworks.com/matlabcentral/answers/uploaded_files/1103995/Plug%20-%20Copy.txt")
T = 54245×6 table
XC YC VX VY Omegaz NP ___ ____ ___________ ___________ _______ _____ -50 6 -1.9191e-06 2.2662e-05 0.77066 46022 -50 6.25 -1.9191e-06 2.2662e-05 0.77066 46022 -50 6.5 -1.9191e-06 2.2662e-05 0.77066 46022 -50 6.75 -1.9191e-06 2.2662e-05 0.77066 46022 -50 7 1.2339e-05 -1.805e-06 0.67463 50001 -50 7.25 1.2339e-05 -1.805e-06 0.67463 50001 -50 7.5 1.2339e-05 -1.805e-06 0.67463 50001 -50 7.75 1.2339e-05 -1.805e-06 0.67463 50001 -50 8 1.5834e-08 -4.2745e-06 0.74742 50001 -50 8.25 1.5834e-08 -4.2745e-06 0.74742 50001 -50 8.5 1.5834e-08 -4.2745e-06 0.74742 50001 -50 8.75 1.5834e-08 -4.2745e-06 0.74742 50001 -50 9 1.3008e-05 -4.0343e-05 0.77883 45183 -50 9.25 1.3008e-05 -4.0343e-05 0.77883 45183 -50 9.5 1.3008e-05 -4.0343e-05 0.77883 45183 -50 9.75 1.3008e-05 -4.0343e-05 0.77883 45183
F = scatteredInterpolant(T.XC, T.YC, T.VY);
[xmin, xmax] = bounds(T.XC);
[ymin, ymax] = bounds(T.YC);
x0 = linspace(xmin, xmax, 50);
y0 = linspace(ymin, ymax, 50);
[xq, yq] = meshgrid(x0, y0);
zq = F(xq, yq);
contourf(x0, y0, zq)
  2 commentaires
Yashvardhan Bhati
Yashvardhan Bhati le 22 Août 2022
Well this works well, Thanks. but how do i get the Coutour legend and is there any way to make the contour plot more coarse or refine based on requirement.
Chunru
Chunru le 22 Août 2022
Specifies the levels:
contourf(x0, y0, zq, levels) % where levels is the chosen levels

Connectez-vous pour commenter.

Plus de réponses (0)

Catégories

En savoir plus sur 2-D and 3-D Plots dans Help Center et File Exchange

Produits


Version

R2021a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by