use xsteam for matlab

I would like to run this code with the following input please read problem statement above

%% Input

T2 = 100; % oC Input Turbine exit temperature T2=T3

p2 = XSteam('psat_T', T2);

T1 = 400; % oC Input is Turbien inlet temperatre T1

%% Required:

% Simulate the effect of boiler pressure on Rankine Cycle

%% Solution

for i = 1:10

p1 = i*50; %bar

h1 = XSteam('h_pT',p1,T1); %kJ/kg pressure in bar, T in C, h in J/kg

s1 = XSteam('S_pT',p1,T1);

s2 = s1; %isentropic turbine

h2 = XSteam('h_ps',p2,s2); % kJ/kg Input Turbine exit is saturated vapor

x2 = XSteam('x_ps',p2,s2);

p3 = p2; % state 3 is saturated liquid)

T3 = T2;

s3 = XSteam('SL_T', T3);

h3 = XSteam('hL_T', T3); %kJ/kg

s4 = s3; % pump is assumed insentropic

p4 = p1;

h4 = XSteam('h_ps', p4, s4); %kJ/kg

wturbine = (h1-h2); %kJ/kg

wpump = (h4-h3); %kJ/kg

wnet = wturbine-wpump; %kJ/kg

qadded = (h1-h4); %kJ/kg

etathermal = wnet/qadded; % calculate efficiency [-]

formatSpec = 'P_Boiler %5.1f MPa, x2 %5.2f, wnet %7.1f[kJ/kg], qadded

%7.1f[kJ/kg], eta %5.2f\n';

fprintf(formatSpec, p1/10, x2, wnet, qadded, etathermal)

end

[Steven Lord]

You have not stated what difficulty you're experiencing when running that code, nor have you asked a question about it. Please explain what type of help you're looking for with this question.