Effacer les filtres
Effacer les filtres

Modeling condensation on walls using Simscape Moist Air

3 vues (au cours des 30 derniers jours)
Ali
Ali le 4 Oct 2022
Modifié(e) : Ali le 5 Oct 2022
I am trying to model condensation in an electronic box that has a cold plate and a cover. This box can go trough various climates and under some circumstances, it will see condensation occur inside the box, either everywhere or on one of the surfaces. In some circumstances, the relative humidity next to the cold plate or the cover can reach 100% and condensation will occur, but the volume of the air inside the box is not saturated yet.
I can model the box using constant volume chamber block, but that would not capture the condensation process as I described above. Another analogy of this case is when the air inside the house is not fully saturated, but the moisture is condensing on the windows. Is there anyway to model the surface condensations?

Réponse acceptée

Yifeng Tang
Yifeng Tang le 5 Oct 2022
Starting R2022b, the Pipe block in the Moist Air domain contains the "Effect of Condensation on Wall Surface". It's different from the condensation due to the volume vapor pressure higher than satuation.
For the constant volume chamber block, there isn't really a "wall" in this block. If you can represent what you try to model with a pipe block, you can use R2022b to study surface condensation.
  1 commentaire
Ali
Ali le 5 Oct 2022
Modifié(e) : Ali le 5 Oct 2022
Hi Yifeng.
Thanks, that's pretty much what I'm looking for. I have already asked Mathworks to show me how we can do our modeling with such blocks.
I appreciate your help.

Connectez-vous pour commenter.

Plus de réponses (0)

Catégories

En savoir plus sur Simscape Fluids dans Help Center et File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by