Finite difference temperature distribution with TDMA
69 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
A stainless steel (thermal conductivity, k = 20 W/mK) fin has a circular cross-sectional area (diameter, D=4 cm) and length L=16 cm. The wing is attached to a wall with a temperature of 200C. The ambient temperature of the fluid surrounding the fin is 20C and the heat transfer coefficient is h=10 W/m2K. Fin tip is insulated. Determine the following by applying finite differences with TDMA.
1. Temperatures inside the fin and the amount of heat radiated from the fin. Plot the temperature distribution.
2. Discuss the effect of the number of element dimensions for N = 5, 10, 50, and 100. Plot the temperature distribution.
The temperature distribution from the analitic solution is like this: T1=150.54, T2=111.107, T3=78.671, T4=50.741, T5=25.172, my code does not give these values.
clc
clear all
L=0.16; %lenght
N=6; %number of nodes
dx=L/(N-1); %lenght between nodes
T=zeros(N+1,1);
Tb=200; %the wall temperature (boundary condition)
k=6; %number of iterations
for j=1:1:k
T(1,1)=Tb;
T(5,1)=T(7,1); %the second boundary condition due to the isulation on the tip of the fin
for i=2:1:N
T(i,1)=(T(i+1,1)+T(i-1,1)+1.536)/2.0768; %FDE narrowed down
end
T(N,1)=T(N-1,1);
plot(T);
hold on
end
hold off
If I can get some help with my code.
16 commentaires
Réponse acceptée
Torsten
le 30 Nov 2022
Déplacé(e) : Torsten
le 30 Nov 2022
You solve the system iteratively. But you were told to solve it with the Thomas-Algorithm. So apply this algorithm to the matrix A below.
k = 20;
T_inf = 20;
h = 10;
D = 0.04;
L = 0.16;
T_at_wall = 200;
N = 6;
dL = L/(N-1);
A = zeros(N+1);
b = zeros(N+1,1);
A(1,1) = 1.0;
b(1) = T_at_wall;
for i = 2:N
A(i,i-1) = k/dL^2;
A(i,i) = -(2*k/dL^2 + 4/D*h);
A(i,i+1) = k/dL^2;
b(i) = -4/D*h*T_inf;
end
A(N+1,N-1) = -1.0;
A(N+1,N+1) = 1.0;
b(N+1) = 0;
T = A\b;
T = T(1:N)
2 commentaires
EGE
le 7 Mar 2023
can you please explain the line after "end"? I could not figure out what it is. Thanks in advance.
Plus de réponses (0)
Voir également
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!