![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1259305/image.png)
How to generate 6 cycle or 10 cycle hanning modulated tone burst excitation
33 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I have been trying to generate a hanning window modulated tone burst excitation with a centre frequency of 100 KHz and with 6 or 10 cycles as shown in the picture. Once generated I want to use this as an input excitation to my transducer.
Please let me know how can i acheive this?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1259165/image.png)
0 commentaires
Réponses (1)
Mathieu NOE
le 11 Jan 2023
hello
try this
all the best
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1259305/image.png)
fsin = 100e3; % sine freq
Fs = 100*fsin; % sampling freq
dt = 1/Fs;
duration = 0.2e-3; % signal duration in seconds
samples = ceil(duration*Fs);;
t = dt*(0:samples-1);
offset = dt*(samples/2); % to center the gaussian envelope
a = 200*Fs; % increase or decrease a to change number of periods
signal = sin(2*pi*fsin*t).*exp(-a*(t-offset).^2);
figure(1),plot(t,signal);grid
11 commentaires
Mathieu NOE
le 20 Jan 2023
if you want to create 1 s of data and you are limited to 8192 points, then your effective max sampling rate is 8192 Hz. How do you want to create a 100 kHz signal in this case ?
Voir également
Catégories
En savoir plus sur Waveform Generation dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!