Dear Friend, I was wondering if anybody answer my question, I have used "elec_solar" model (Solar Cell block in simscape)to extract I-V curve for my panel,but when I change just Isc and Voc ,It is faced to error. I changed Isc to 8.36A and Voc to 33.2V. I think the problem related to Cell number which i couldn't find this parameter in this block but ,it was exist in previous version of this block.
Would you be able to divulge your answer? I have encountered the same problem as well. I have also tried to put several of the cells in series to no avail, which I'm hoping this will solve.
The key factor is to series cell together ,but you should put a ramp instead of voltage which first apply to variable resistance as you can see in related webinar ...
Hi, I am also encountering the same problem when I try to use an open circuit voltage of 21.1V and its giving me an error. If I try with any open circuit voltage below 10V, it works fine. What could be the problem?
Impossible de terminer l’action en raison de modifications de la page. Rechargez la page pour voir sa mise à jour.
Translated by
Sélectionner un site web
Choisissez un site web pour accéder au contenu traduit dans votre langue (lorsqu'il est disponible) et voir les événements et les offres locales. D’après votre position, nous vous recommandons de sélectionner la région suivante : .
Vous pouvez également sélectionner un site web dans la liste suivante :
Comment optimiser les performances du site
Pour optimiser les performances du site, sélectionnez la région Chine (en chinois ou en anglais). Les sites de MathWorks pour les autres pays ne sont pas optimisés pour les visites provenant de votre région.