Dicrepancies in FFT values at lower frequencies
5 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I have been trying to compare the time domain and frequency domain results from Matlab and ansys for a vibrating system. Although the values agree generally, at lower frequencies there appears to be a significant difference.Especially at 0, the amplitude varies significantly (in the time domain data,at time 0, both systems had the same amplitude). Why would that be? I have exported data from excel sheet for this analysis.
%Import time domain data from excel sheet
file = '....nt.xlsx';
sheet= '...';
data = xlsread(file,sheet);
time = data(:,1);
mat_amp = data(:,2);
ans_amp= data(:,3);
%% Frequency domain plot
L = length(time);
n=2^nextpow2(L);
Ts = time(2)-time(1);
Fs = 1/Ts;
f= Fs*(0:(n/2))/n;
ft_mat = fft(mat_amp,n);
M2 = abs(ft_mat/n);
M1 = M2(1:n/2+1);
M1(2:end-1)=2*M1(2:end-1);
ft_ans = fft(ans_amp,n);
A2 = abs(ft_ans/n);
A1 = A2(1:n/2+1);
A1(2:end-1)=2*A1(2:end-1);
figure(2)
plot(f,abs(M1),'-*',f,abs(A1)) ;
title("Frequency Response-Beam with Mass")
xlabel("f (Hz)")
ylabel("Amplitude")
grid on;
legend('Matlab', 'Ansys');
figure(3)
plot(f,20*log10(abs(M1)),'-*',f,20*log10(abs(A1)));
title("Frequency Response-Beam with Mass")
xlabel("f (Hz)")
ylabel("Amplitude in dB")
grid on;
legend('Matlab', 'Ansys');
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1546722/image.png)
10 commentaires
Réponses (0)
Voir également
Catégories
En savoir plus sur Spectral Measurements dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!