Difficulty Generating Analog Output of White noise - Data Acquisition Using Simulink NI USB-6009
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I am facing challenges in generating the analog output of a white noise using Simulink in conjunction with the NI USB-6009 data acquisition device. Despite my efforts to configure the system appropriately, I have been unable to achieve the desired output.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1572602/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1572607/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1572612/image.png)
2 commentaires
Walter Roberson
le 19 Déc 2023
I appreciate your generous suggestions. Can you suggest some solution to the problem?
Réponses (1)
Walter Roberson
le 19 Déc 2023
If the bounded option is enabled, the output is uniform white noise with amplitude between +1 and −1. If the bounded output is not enabled, the output is a Gaussian white noise and the values are not bounded between +1 and −1
Values that are in the range -1 to +1 are generally not in the range 0 to +5 as is expected for the way you have configured the output block.
Voir également
Catégories
En savoir plus sur National Instruments Frame Grabbers dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!