Could not connect to Zynq hardware board using IP address 192.168.1.101.

Could not connect to Zynq hardware board using IP address 192.168.1.101.

Check that your device is connected to a LAN or direct network connection accessible from the MATLAB development computer

[Manikanta Aditya]

Troubleshooting connection issues with Xilinx Zynq platform - MATLAB Answers - MATLAB Central (mathworks.com)

[Manikanta Aditya]

As mentioned, try checking your connection as well, and ensure that the USB cable is plugged into the ‘USB-to-UART’ port of the hardware and the power switch is turned on. If this error persists, switch off the hardware, wait for 10 seconds, switch on the hardware and then repeat this step.