![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703831/image.png)
Vous suivez désormais cette question
- Les mises à jour seront visibles dans votre flux de contenu suivi.
- Selon vos préférences en matière de communication il est possible que vous receviez des e-mails.
Data Organization in ECG Analysis: Separate Leads or Individual Signals
Réponse acceptée
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703831/image.png)
22 commentaires
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703846/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703861/image.png)
![csv file_ecg exp](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703886/csv%20file_ecg%20exp.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703891/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703896/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703921/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1703926/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1705076/image.png)
- "ADC gain (ADC units per physical unit) [optional] This field is a floating-point number that specifies the difference in sample values that would be observed if a step of one physical unit occurred in the original analog signal. For ECGs, the gain is usually roughly equal to the R-wave amplitude in a lead that is roughly parallel to the mean cardiac electrical axis. If the gain is zero or missing, this indicates that the signal amplitude is uncalibrated; in such cases, a value of 200 (DEFGAIN, defined in <wfdb/wfdb.h>) ADC units per physical unit may be assumed.
- baseline (ADC units) [optional] This field can be present only if the ADC gain is also present. It is not separated by whitespace from the ADC gain field; rather, it is surrounded by parentheses, which delimit it. The baseline is an integer that specifies the sample value corresponding to 0 physical units. If absent, the baseline is taken to be equal to the ADC zero. Note that the baseline need not be a value within the ADC range; for example, if the ADC input range corresponds to 200-300 degrees Kelvin, the baseline is the (extended precision) value that would map to 0 degrees Kelvin. WFDB library versions 5.0 and earlier ignore baseline fields."
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1705501/image.png)
Plus de réponses (0)
Voir également
Catégories
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Une erreur s'est produite
Impossible de terminer l’action en raison de modifications de la page. Rechargez la page pour voir sa mise à jour.
Sélectionner un site web
Choisissez un site web pour accéder au contenu traduit dans votre langue (lorsqu'il est disponible) et voir les événements et les offres locales. D’après votre position, nous vous recommandons de sélectionner la région suivante : .
Vous pouvez également sélectionner un site web dans la liste suivante :
Comment optimiser les performances du site
Pour optimiser les performances du site, sélectionnez la région Chine (en chinois ou en anglais). Les sites de MathWorks pour les autres pays ne sont pas optimisés pour les visites provenant de votre région.
Amériques
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)
Asie-Pacifique
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)