- Define Weight Functions: Use ‘Transfer Fcn’ blocks to define weighting functions ( W_h ) and ( W_l ). Refer to the following documentation for more details: https://www.mathworks.com/help/simulink/slref/transferfcn.html
- Plant Model: Model your plant ( P_0 ) using appropriate Simulink blocks.
- H-infinity Controller Design: Use the ‘hinfsyn’ function in MATLAB to design the H-infinity controller ( K ) based on the mixed sensitivity setup. Refer to the following documentation for more details: https://www.mathworks.com/help/robust/ref/dynamicsystem.hinfsyn.html
- Simulink Integration: Integrate the controller ( K ) into Simulink using the ‘State-Space’ block or ‘Transfer Fcn’ block.
- Interconnection: Connect ( W_h ), ( W_l ), plant ( P_0 ), and controller ( K ) as per the mixed sensitivity configuration.
- Boost Converter: Use blocks like ‘MOSFET’, ‘Inductor’, ‘Capacitor’, and ‘Diode’ to build the boost converter.
How to construct the Hinfinity controller for a mixed sensitivity problem with a plant P_0 as the converter in simulink?
27 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I am not sure how to build the controller and connect it to suitable weight functions w_h and w_l and to the boost converter in Simulink?
I did find how to build a boost converter, I would appreciate some screenshots, and detailed explanation on the names of the blocks in the schematics.
Thanks in advance!
0 commentaires
Réponses (1)
Dhruv
le 17 Juil 2024 à 9:00
Hi Alon,
To construct an H-infinity controller for a mixed sensitivity problem in Simulink, follow these steps below:
For more detailed information on mixed-sensitivity loop shaping, please refer to the following MathWorks documentation below:
I hope this helps!
Voir également
Catégories
En savoir plus sur Gain Scheduling dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!