Simulink onramp 3.1 represent power systems components task 5 error

me esta dando este error la tarea, pero se ha hecho todo desde el inicio correctamente

Simulink onramp 3.1 represent power systems components task 5 error

Answer 1

[Shivam Gothi]

Hello @Miguel Aybar,

As per my understanding, you have completed tasks 1-4 of Power Systems Simulation Onramp successfully, but not able to complete task-5, even after following all the instructions carefully.

I also encountered same issue, but resolved it in the following way:

• The block "Wye-Connected Load" is to be configured as a "series RL" load.
• But, by default, it also models stray capacitance. You can verify this by going to the "Parasitics" drop-down found in the "block parameters" of "Wye-Connected Load". You can see that "Parasitic Parallel Conductance" is set to its default value of 1e-6.
• Change the "Parasitic Parallel Conductance" to the value of "0" as shown below:

After making the above change, submit the task-5 by clicking "submit" button. You will see that your test is now passed as shown below:

I hope you find this useful !!

[Miguel Aybar]

Thanks Shivam Gothi for the response, that task already worked for me with your recommendation, thank you very much for your answers.

[Ajinkya]

Thanks @Shivam Gothi

[Jhonny]

@Shivam Gothi, muchas gracias por compartir esta información, llevaba dos días intentando hacer esa actividad y no habia podido

[Tomasz]

Thx !!!

Answer 2

[Ruisong]

I met this issue as well and the answer here works for me