Waveform acquired from Keysight DSOX1204A using VISA block in Simulink is not proper
Afficher commentaires plus anciens
I want to get waveform in real time from my scope (Keysight DSOX1204A) . So, I used this example block available which is actually made for reading waveform data from this particular oscilloscope, but when I used, it didn't acquire the data properly i.e. when I gave a DC voltage of 0.72 V it measured -66 V and when I gave 0.25 V it measured -36 V. I doubt whether the scaling & offsets are considered. Changing Binary Data Size didn't worked (like changing int8 to int16 or any other).
If so how can I format this binary data ? (In Simulink)
Réponses (1)
Satwik
le 22 Juil 2025
0 votes
I understand that you were able to connect to your Keysight DSO-X 1204A Oscilloscope, but you are facing issues while reading data and are concerned about the scaling.
To adjust the scaling and properly format the binary data, I recommend using the VISA Explorer app. It provides a user interface to connect to and communicate with instruments over VISA. Please refer to the following MathWorks documentation for detailed information on the VISA Explorer app:
The 'Examples' section of the above documentation includes a video demonstrating how to read waveform data from a Keysight DSO-X 1204A Oscilloscope using VISA Explorer:
I hope this helps!
Catégories
En savoir plus sur Oscilloscopes dans Centre d'aide et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!