How do I delete an Analysis Points of the Linearization Manager that is on a bus?

I wanted to remove all Linearization Points from a bus. But when I delete all the elements in the list on the right, the "OK" gets grayed out and I can't confirm the changes I made.

When I exchange the signal for a different one, the OK is active and my changes can be saved.

How can I completly remove an Analysis point from a bus?

Answer 1

[Akanksha]

Hi @Julian Leonard,

You cannot confirm changes when the list is empty because the dialog expects at least one analysis point. To completely remove an analysis point from a bus, you need to:

1. Delete the analysis point from the Linear Analysis Points list in the Linear Analysis Tool or Model Linearizer instead of just clearing the bus dialog. Open Analysis Points tab - Select the point - Click Remove.
2. Do not leave the dialog empty; instead, remove the point at the model level. The bus dialog only edits which signals are included, not whether the analysis point exists.

For further information kindly visit -

https://www.mathworks.com/help/slcontrol/ug/specify-portion-of-model-to-linearize-in-simulink-model.html

Hope this helps!