margin command on a system with transfer function on reference
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
montyynis
le 6 Août 2015
Réponse apportée : Sriram Narayanan
le 13 Août 2015
I have the following system (see picture). When calculating gain and phase margins with 'margin' command, should I consider L=GK to be an open loop transfer function (i.e. should I call margin(GK) )? If so, what difference does the transfer function H applied on the reference r make to gain and phase margins?
0 commentaires
Réponse acceptée
Sriram Narayanan
le 13 Août 2015
It depends on what you are using the Transfer Function H for. H would typically be used as a prefilter or for feedforward control. So, it should not be shaping the crossover frequency and therefore, would not have an effect on the gain/phase margins. However, you should calculate gain/phase margins using the open-loop GK to meet desired robustness/disturbance rejection requirement and the prefilter H could help is adjusting the reference to meet reference tracking requirement.
0 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Dynamic System Models dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!