failed to receive a control packet from the FPGA target
3 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hi,
I am trying to perform the simulink example (fil_pid) using MATLAB 2014b, Vivado 2014.1, and Xilinx VC707 board. I performed all the steps successfully as shown in the figures below.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/151246/image.png)
However, when I replace the controller and try to simulate the design, it gives me this error message:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/151248/image.png)
I tried to check the connection with the FPGA (using ping command), and I found that it is working well. And the FPGA programming file is downloaded successfully.
So, I do not know what is really the problem.
Thanks.
0 commentaires
Réponses (1)
Jazmin
le 13 Sep 2019
Hello, did you solve the problem, I found the same mistake, I'musing Atlys Spartan 6 development board... Please, need help
0 commentaires
Voir également
Catégories
En savoir plus sur FPGA, ASIC, and SoC Development dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!