Effacer les filtres
Effacer les filtres

Is my system stable

4 vues (au cours des 30 derniers jours)
Safiya
Safiya le 15 Déc 2015
Modifié(e) : Safiya le 19 Déc 2015
Hi, My bode and step response is like in the figure in the attachment. poles are on the left but the step response is increasing function. is this stable system ? what should be level, and min max of step response so that we can say about the stability. thanks

Réponse acceptée

Mayank Dwivedi
Mayank Dwivedi le 17 Déc 2015
Hi Safiya,
From the Bode plot it is clear that the gain margin of your system is infinite and phase margin is about 100 degrees. Both of them are positive indicating a stable system. However, whether the system is stable or not cannot be directly inferred from the step response plot as your input step value is not clear.
Can you confirm if you are providing a unit step input? Can you please tell what is the step value?. Also the pole seems to be very close to imaginary axes, can you provide the pole zero locations?
-Mayank
  1 commentaire
Safiya
Safiya le 18 Déc 2015
Modifié(e) : Safiya le 19 Déc 2015
Thankyou for your reply. i used step function step(Hs), Hs is my TF. and the value of the poles and zeros are:
p =
1.0e+06 *
0.0000 + 0.0000i
-3.5030 + 0.0047i
-3.5030 - 0.0047i
z =
1.0e+05 *
-2.4876
-2.4801

Connectez-vous pour commenter.

Plus de réponses (1)

Safiya
Safiya le 19 Déc 2015
Modifié(e) : Safiya le 19 Déc 2015
thankyou for your reply. i used step function step(Hs), Hs is my TF. and the value of the poles and zeros are:
p =
1.0e+06 *
0.0000 + 0.0000i
-3.5030 + 0.0047i
-3.5030 - 0.0047i
z =
1.0e+05 *
-2.4876
-2.4801

Catégories

En savoir plus sur Plot Customization dans Help Center et File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by