stereo calibration intrinsics are different than single camera calibration
4 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I have checkerboard data from two cameras. If I run the stereo calibration app and look at the calibration results for each camera the results are different than if I run the single camera calibration for each camera separately. The difference between the results is not within the error estimation.
Can anyone explain why there is a discrepancy between the two?
Thank you!
1 commentaire
Florian Morsch
le 4 Juin 2018
Do you use the same set of pictures for both calibrations? If you use different sets you also will get different values.
Réponses (1)
Diarmaid Cualain
le 30 Mai 2018
I suspect that in stereo calibration, as both cameras are calibrated simultenously, one cameras calibratin might componsate for a slight-mis calibration of the other camera. This would result in different calibration values for a camera calibrated on its own vs. as a stereo pair. However, I would assume that the variance would be very small.
0 commentaires
Voir également
Catégories
En savoir plus sur Camera Calibration dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!