Hi, i drew 4 cylinders, while removing a part from each and sticking them together. However, the cylinders are hollow and i want to at least have a bottom and top lid (same shape as the cylinders) if not fully fill it in 3D. Any help would be nice.
2 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/156956/image.png)
h=figure(1);
set(h, 'WindowStyle', 'docked')
drawnow
for i=0:1.5:6
[x,y,z]= cylinder(1,1000);
z(:,386:617)=NaN;
x(:,386:617)=NaN;
y(:,386:617)=NaN;
h=surf(x+i,y,z, 'FaceColor', [0,0,1]);
hold on
end
0 commentaires
Réponses (1)
KSSV
le 7 Oct 2016
clc; clear all ;
h=figure(1);
set(h, 'WindowStyle', 'docked')
th = linspace(0,2*pi) ;
R = 1 ;
for i=0:1.5:6
[x,y,z]= cylinder(1,100);
% draw circle
% z(:,386:617)=NaN;
% x(:,386:617)=NaN;
% y(:,386:617)=NaN;
% draw circle
xc = i+R*cos(th) ; yc = R*sin(th) ;
% top cirlce z
zc1 = ones(size(xc)) ;
% bottom cricle
zc0 = zeros(size(xc)) ;
h=surf(x+i,y,z, 'FaceColor', [0,0,1]);
hold on
patch(xc,yc,zc0,'r')
patch(xc,yc,zc1,'r')
end
2 commentaires
Voir également
Catégories
En savoir plus sur Surface and Mesh Plots dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!