using C code for serial port communication in matlab via mex file
10 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hi,
I have implemented a C code for the serial port Communication. I want to use this function in matlab. I read the documentation about mex file (mex function) and i made the changes which i need for mexFunction. When i write mex serial_port.c to the command line everything is fine and matlab generates serial_port.mexa64. But when i want to use it and write serial_port() to the command line the serial port is not opening. what could be the problem?
here is my code:
#include "mex.h"
#include <stdio.h>
#include <fcntl.h>
#include <termios.h>
#include <errno.h>
void mexFunction (int nlhs, mxArray *plhs[], int nrhs,
const mxArray *prhs[])
{
if(nrhs != 0) {
mexErrMsgIdAndTxt("MyToolbox:arrayProduct:nrhs",
"zero inputs required.");
}
if(nlhs != 0) {
mexErrMsgIdAndTxt("MyToolbox:arrayProduct:nlhs",
"Two output required.");
}
char serial;
struct termios SerialPortSettings;
serial= open("/dev/ttyACM1", O_RDWR | O_NOCTTY);
printf("%i \n",serial);
tcgetattr(serial, &SerialPortSettings);
cfsetispeed(&SerialPortSettings,B9600);
cfsetospeed(&SerialPortSettings,B9600);
SerialPortSettings.c_cflag &= ~PARENB;
SerialPortSettings.c_cflag &= ~CSTOPB;
SerialPortSettings.c_cflag &= ~CSIZE;
SerialPortSettings.c_cflag &= ~CS8;
SerialPortSettings.c_cflag &= ~CRTSCTS;
SerialPortSettings.c_cflag |= CREAD | CLOCAL ;
SerialPortSettings.c_cc[VMIN] = 9;
SerialPortSettings.c_cc[VTIME] = 0;
SerialPortSettings.c_iflag &= ~(IXON | IXOFF | IXANY);
SerialPortSettings.c_iflag &= ~(ICANON | ECHO | ECHOE | ISIG);
tcsetattr(serial,TCSANOW,&SerialPortSettings);
char writeb[9];
writeb[0]=1;
writeb[1]=2;
writeb[2]=0;
writeb[3]=0;
writeb[4]=0;
writeb[5]=0;
writeb[6]=0;
writeb[7]=200;
writeb[8]=writeb[0]+writeb[1]+writeb[2]+writeb[3]+writeb[4]+writeb[5]+writeb[6]+writeb[7];
int bytes_written=0;
bytes_written=write(serial,writeb,sizeof(writeb));
char readb[9];
int bytes_read;
int a;
bytes_read=read(serial,&readb,9);
a=readb[2];
printf("%i \n",a);
close(serial);
}
best regards
4 commentaires
Walter Roberson
le 26 Mai 2017
There is no direct access from MATLAB or Simulink to C++ classes, unless perhaps there is something that can be done with custom code generation.
See however, the discussion at https://www.mathworks.com/matlabcentral/answers/783-i-have-a-c-class-how-can-i-interface-to-it-through-a-matlab-class
Réponses (0)
Voir également
Catégories
En savoir plus sur External Language Interfaces dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!