How to match and take the part of the string between two specified characters
19 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hi,
I have the text file, and read some items form the text file:
for start time: as in test file: Start Time : 2020-06-08 10:12:01.02.653-starting VNA: FindSlot3 startTime: 2020-06-08 10:12:01.02.65 I used the following command: startTime = strtrim( regexp( content, '(?<=Start Time\s+:\s*).*?(?=*-starting)', 'match', 'once' )) ; but I do not getting my required output: I use the following code:
% - Define output header.
header = {'RainFallID', 'IINT', 'Rain Result', 'Start Time', 'Param1.pipe', ...
'10 Un Para2.pipe', 'Verti 2 mixing.dis', 'Rate.alarm times'} ;
nHeaderCols = numel( header ) ;
% - Build listing sub-folders of main folder.
D_main = dir( 'mainfolder' ) ;
D_main = D_main(3:end) ; % Eliminate "." and ".."
% - Iterate through sub-folders and process.
for dId = 1 : numel( D_main )
% - Build listing files of sub-folder.
D_sub = dir( fullfile( 'mainfolder', D_main(dId).name, '*.txt' )) ;
nFiles = numel( D_sub ) ;
% - Prealloc output cell array.
data = cell( nFiles, nHeaderCols ) ;
% - Iterate through files and process.
for fId = 1 : nFiles
% - Read input text file.
inLocator = fullfile( 'mainfolder', D_main(dId).name, D_sub(fId).name ) ;
content = fileread( inLocator ) ;
% - Extract relevant data.
rainfallId = str2double( regexp( content, '(?<=RainFallID\s+:\s*)\d+', 'match', 'once' )) ;
iint = regexp( content, '(?<=IINT\s+:\s*)\S+', 'match', 'once' ) ;
rainResult = regexp( content, '(?<=Rain Result\s+:\s*)\S+', 'match', 'once' ) ;
startTime = strtrim( regexp( content, '(?<=Start Time\s+:\s*).*?(?=*-starting)', 'match', 'once' )) ;
endTime = strtrim( regexp( content, '(?<=End Time\s+:\s*).*?(?= -)', 'match', 'once' )) ;
chamber=regexp( content, '(?<=chamber\s+:\s*)\S+', 'match', 'once' ) ;
end
% - Output to XLSX.
outLocator = fullfile( 'outputfolder', sprintf( '%s.xlsx', D_main(dId).name )) ;
fprintf( 'Output XLSX: %s ..\n', outLocator ) ;
xlswrite( outLocator, [header; data] ) ;
end
my desired output is:
2 commentaires
Jan
le 2 Oct 2017
Modifié(e) : Jan
le 2 Oct 2017
"not getting my required output" is a weak description of what is going on. Please explain, which problem you have. It is inefficient to let the readers guess this detail.
match and take the part of the string between two specified characters
Which string, what specified characters, where does this occur in the code?
It is confusing when you post a large block of code, which runs as wanted. Do not expect the readers in the forum to know, which line of code is concerned.
Réponses (2)
Cedric
le 2 Oct 2017
Modifié(e) : Cedric
le 2 Oct 2017
Replace the line that extracts the start time with:
startTime = strtrim( regexp( content, '(?<=Start Time\s+:\s*).*?(?= - )', 'match', 'once')) ;
and you can extract the duration with:
duration = strtrim( regexp( content, '(?<=Duration\s+:\s*)\S+', 'match', 'once' )) ;
where the pattern (?<=Duration\s+:\s*)\S+ extracts
- one or more non-white-spaces: \S+
- preceded by: (?<=...) which is a look behind
- the literal Duration followed by one or white-spaces \s+ followed by the literal : followede by zero or more white-spaces \s*
Finally, for chamber, you almost did it, it's good! The problem is that there can be some white-spaces in the middle of what you are trying to extract, and \S+ will break at the first white-space. Here there are several options for getting the end of the line. One would be based on anchoring the end of the line, and the other is based on picking all characters until it find a carriage return (\r) or a new line (\n) [which are not displayed in your text editor unless you ask for it, but we can use them]:
chamber = strtrim( regexp( content, '(?<=chamber\s+:\s*)[^\r\n]+', 'match', 'once' )) ;
where [^..] defines a set of characters not to match, [^..]+ matches one or more of anything that is not in this set, and \r and \n code the carriage return and the new line. So the whole thing reads: match one or more of anything that is not a carriage return or a new line.
3 commentaires
Cedric
le 2 Oct 2017
Modifié(e) : Cedric
le 2 Oct 2017
Yes you can, using the look-forward that you implemented (where I removed the *):
'(?<=Start Time\s+:\s*).*?(?=-starting)'
but then you make the pattern specific to files where you have '-starting' after the time/date, which I have not seen in your examples. If I look at what you provided, I see the two following possibilities:
Start Time : 2013-06-08 10:12:01.02.653 -
Start Time : 2020-06-08 10:12:01.02.653 - VNA: FindSlot3
so I thought about what should break the match that is common, and this is the presence of a white space followed by a dash. And you can see that I made a mistake by the way, the pattern must be
'(?<=Start Time\s+:\s*).*?(?= -)'
and not
'(?<=Start Time\s+:\s*).*?(?= - )'
especially if there can be situations where what follows the date/time is ' -starting', with no white-space after the dash.
So you where correct in using a look around approach (look behind and look forward framing what you want match), but given all the possible cases of content in your files you were too specific.
Cedric
le 4 Oct 2017
Modifié(e) : Cedric
le 4 Oct 2017
Well, let me bring a correction actually, because I realize, looking a second time at your last example, that there is no white-space before the dash in
Start Time : 2020-06-08 10:12:01.02.653-starting VNA: FindSlot3
so one way to catch '-starting' or ' -' is to look for a dash followed by a character that is not a number. If these are all the cases present in all versions of your file, the following should work (to test):
'(?<=Start Time\s+:\s*).*?(?=-\D)'
where \D means "anything but a numeric digit" (if is the complement of \d).
Kian Azami
le 2 Oct 2017
You can use the following code to extract the lines relevant to 'Start Time' and the 'Duration' and then acquire the required data. The command 'textscan' helps to acquire data from text files.
clc
clear all
close all
fid = fopen('RainFallReport5.txt');
Start = textscan(fid,'%q%q%q%q%q%q%q%q',1,'HeaderLines',9);
Duration = textscan(fid,'%q%q%q%q%q%q%q%q',1,'HeaderLines',2);
Start_Time = ['Start Time:' strcat(Start{1,[4 5]})]
Duration = ['Duration:' strcat(Duration{1,3})]
fclose(fid);
0 commentaires
Voir également
Catégories
En savoir plus sur File Operations dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!