Effacer les filtres
Effacer les filtres

Info

Cette question est clôturée. Rouvrir pour modifier ou répondre.

I need help modeling a Temperature controller for a furnace with PID on Matlab and SIMULINK with several conditions

1 vue (au cours des 30 derniers jours)
Temperature controller with PID on Matlab and SIMULINK Initial temperature 25 Deg 25Deg to 650 Deg (0.5 Deg/Min) 650Deg-1600 Deg (100Deg/hr) 1600 Deg constant 50h 1600Deg-1000Deg (100Deg/hour) 1000Deg - 200Deg (15h) 200Deg-25Deg (5h) I need assistance with the matlab code and the SIMULINK Block
  3 commentaires
Mohamed Chaouechi
Mohamed Chaouechi le 31 Oct 2017
Still struggling with the SIMUlINK model , I don't know how to change the rate of degree addition in each interval of time .
Birdman
Birdman le 31 Oct 2017
You just share the simulink model and I can be a lot helpful to you.

Réponse acceptée

Yogananda Jeppu
Yogananda Jeppu le 11 Nov 2017
You can use a rate limiter with variable limits. Put a logic to check the output temperature of the plant and change the rate limiter limit input. This will provide you the commands with the desired rates. Make the model with the simulation time suitably selected. Your time is in hours. Make an initial model and post it. Someone will review it and comment. Only way to learn.

Plus de réponses (0)

Cette question est clôturée.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by