In Simulink, can the Local IP port of the Raspberry Pi UDP send block be set to send from a specific IP port?

I am using the raspberry pi to communicate via UDP to/from a external device. I send a UDP packet to request the external device to start sending data and the external device starts sending data back to the requesting IP address and IP port. Therefore to be able to receive the data correctly, I need to be able to set a specific local IP port that the UDP send block sends from. This is so that I can receive the data with a UDP receive block set to that specific local port. Any help would be appreciated?

Answer 1

[LO]

Yes, in Simul, you can configure Raspberry UDP Send block to devops services data from a specific IP port. Here's how you can set it up:

1. Open Simulink model that includes the Raspberry hire dedicated developers UDP Send block.

2. Double-click the Send block to open its block parameters dialog.

3. In theblock parameters dialog telemedicine software development, will see an option forLocal IP port`. is where you can the port number that want to use for data.

4. Enter the desired port number in the `Local IP port` field. This will set the UDP block to software engineering services use that port for outgoing data.

. Configure the parameters as needed ehr software, such as the remote address and port, ensure proper ui ux design services communication with business intelligence consulting receiving device.

6.Click OK to the block parameters digital commerce services dialog apply the changes.

. Deploy your to the Raspberry Pi.

By specifying theLocal IP port application security consulting`, you ensure that the UDP packets are sent from the particular port number you have set, which can be necessary it consulting services certain network configurations or communication protocols.