Rigid body tree D-H parameters
31 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hi I'm using matlab 2016/2017 with robotic toolbox installed. I've followed all the tutorials to learn how to use the RigidBody class. However, when I try to build my own rigid body tree it seems that something is wrong with my frames orientations. I don't know exactly how the DH parameter alpha for my third joint is not taken into account I've attached a picture of my kinematic diagram and a sample of my code. If somebody can help.
Thanks
if true
d67 = 0 ; %317.56 ;
alpha67 = 62*pi/180 ;
r67 = 0 ;
d78 = 0 ; % -53.03 ;
alpha78 = 17*pi/180 ;
r78 = 0 ; %172.23 ;
d89 = 0 ; %343.18 ;
r89 = 0 ; %38.74 ;
r910 = 0 ; % 211.5 ;
r1011 = 0 ; %334.95 ;
theta1112 = 65.98*pi/180 ;
r1112 = 0 ; % 10
dEe = 0 ; %100 ;
% DH = [ r_n alpha_n d_n theta_n]
DHparams = [0 alpha67 0 0;
r78 alpha78 d78 0;
r89 -pi/2 d89 0;
r910 0 0 0;
r1011 0 0 0;
r1112 -pi/2 0 theta1112;
0 0 dEe 0];
body1 = robotics.RigidBody('body1') ; % create the first body
jnt1 = robotics.Joint('jnt1','revolute'); % initial joint fixed to base
setFixedTransform(jnt1,DHparams(1,:),'dh') ; %
body1.Joint = jnt1;
Rcm = robotics.RigidBodyTree;
addBody(Rcm,body1,'base') ;
body2 = robotics.RigidBody('body2');
body3 = robotics.RigidBody('body3');
body4 = robotics.RigidBody('body4');
body5 = robotics.RigidBody('body5');
body6 = robotics.RigidBody('body6');
Endeff = robotics.RigidBody('endeffector');
jnt2 = robotics.Joint('jnt2','revolute');
jnt3 = robotics.Joint('jnt3','revolute');
jnt4 = robotics.Joint('jnt4','revolute');
jnt5 = robotics.Joint('jnt5','revolute');
jnt6 = robotics.Joint('jnt6','prismatic');
jnt3.JointAxis(3) ;
setFixedTransform(jnt2,DHparams(2,:),'dh');
setFixedTransform(jnt3,DHparams(3,:),'dh');
setFixedTransform(jnt4,DHparams(4,:),'dh');
setFixedTransform(jnt5,DHparams(5,:),'dh');
setFixedTransform(jnt6,DHparams(6,:),'dh');
setFixedTransform(Endeff.Joint,DHparams(7,:),'dh');
body2.Joint = jnt2;
body3.Joint = jnt3;
body4.Joint = jnt4;
body5.Joint = jnt5;
body6.Joint = jnt6;
addBody(Rcm,body2,'body1')
addBody(Rcm,body3,'body2')
addBody(Rcm,body4,'body3')
addBody(Rcm,body5,'body4')
addBody(Rcm,body6,'body5')
addBody(Rcm,Endeff,'body6')
show(Rcm);
axis on
view([90.000 0.000])
end
0 commentaires
Réponse acceptée
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Assembly dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!