Why can't the CCP block of C2000 Embedded Coder Support Package work?

I inatalled C2000 Embedded Coder Support Package in matlab2017a,and when I attempt to run the package sample"c28x_ccp_ert.slx" ,there have some errors occurred,but code generation is successfully.

I can download code to the F28335 board but I can't connect to the target via from INCA to do the calibration work.I want to kown if the a2l document"c28x_ccp_ert.a2l" is correct.

So I have two questions:

1.Why the CCP Sample model has some running errors?

2.Why can't I connect the target via from INCA to do the calibration work?

Answer 1

[Venkatesh Chilapur]

Hi,

Our examples are tested to work with Vector Hardware only. Please refer the below post for the same:

https://in.mathworks.com/matlabcentral/answers/431853-ecan-loading-problems-to-ti-c2000-c28x3x-card-are-example-only-for-vector-hardware

On setting up the host CAN hardware to be able to connect to target via CAN communication please refer the documentation page:

https://in.mathworks.com/help/supportpkg/texasinstrumentsc2000/ug/set-up-the-hardware-for-can-communication-between-the-target-and-the-host-computer-.html

Regards.

Venkatesh C

[zy1]

Thanks for your answer .

Does it have some methods for example modify some configuration,that can make the examples work with INCA?

Answer 2

[ming li]

A2L automatically generated by MATLAB can only connect CANape, while Inca cannot identify it. A2L needs to be adjusted in format, and some keywords need to be modified. Currently, there is no automatic conversion tool.